Timin belt on Mondeo

[Topsie]

Hi

I am trying to change the cambelt on my 1999 1.8 Zetec Mondeo. But cannot see any markings on the cam shaft pully apart from 3 indents.

I have seen about using a timing pin to line up, how does this work as there is nothing in the haynes manual about this.

Thanks in advance

[twazerk]

Line up mark on crank pulley, remove cambox cover, there is a slot runs along the rear end of the cams, you can insert a piece of flat bar into them locking them against the top surface of the cambox.

[david1702198]

you can buy a locking tool which slots in between the 2 camshaft pulleys, reg the crankshaft one or 2 ive done in the past have had a webbed end which the pulley sits on and dont have a mark as such but need to be marked yourself.