ChatterBank1 min ago
Immobiliser
I have a Chrysler Neon the electrics have gone a little haywire i cant start my car because the immobiliser wont switch off i have had the AA out they said it needs to be disconnected completely i.e wires disconnecting other wires resoldering back together he said whatever has gone on with the electrics the immobiliser doesn't like it ,does any body know if there is an easier way around this so i can use my car , any help would greatly appreciated , thanks in advance .
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by tasharidg. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Hi tasharidg,
I don't know whether your problem is the same as mine. Although my battery may be fully charged, occasionally my car won't start but I was advised by a local engineer that the immobiliser may be 'stuck'. He advised me, while in the car to remove the key, switch the immobiliser on then off, replace the key in the ignition and restart. Whenever it occurs this solves my problem and the engine starts but I would like to get it put right.
I don't know whether your problem is the same as mine. Although my battery may be fully charged, occasionally my car won't start but I was advised by a local engineer that the immobiliser may be 'stuck'. He advised me, while in the car to remove the key, switch the immobiliser on then off, replace the key in the ignition and restart. Whenever it occurs this solves my problem and the engine starts but I would like to get it put right.
Only 1 answer
