Donate SIGN UP

Vauxhall Corsa 1.2 Easy Tronic '02 reg. Fault Indicator

Avatar Image
oldmisery | 17:52 Tue 11th Jan 2011 | Motoring
5 Answers
My son went to start his car and when turning the ignition a noise came from the engine and a letter F appeared on the dash display. We checked the obvious battery, leads etc. and found very little oil showing on the dipstick but no warning light had appeared. We replenished the oil but the engine will not start. Is there a means of resetting the fault code to enable the engine to operate.
Any help would be appreciated.
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by oldmisery. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Searching the net seems to suggest a porblem with the auto gearbox, water getting into a connection or a faulty crankshaft sensor

http://www.honestjohn...ost/index.htm?t=57536
-- answer removed --
Question Author
Many thanks Hopkirk and mdoo98. My son has managed to borrow a diagnostic device to identify the code meaning. We will try the battery disconnection and also follow the advice on link to honestjohn. Again, many thanks to you both.
Read out the radio code before you disconnect the battery, if you don't have it written down!
Question Author
Eureka, the diagnostic gizmo requested a reset of code. Insert key and bingo, up and running. True to my nickname I told him " It wont last !!! "
Fingers crossed.

1 to 5 of 5rss feed

Do you know the answer?

Vauxhall Corsa 1.2 Easy Tronic '02 reg. Fault Indicator

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.