Edge of my bath tub under the sealer is becoming black

keyplus90 | 16:25 Wed 14th May 2008 | DIY

2 Answers

I have once changed it but this time by mistake put transparent silicon. It is black and visible again. I remember once a person fitted a bath tub ay my mums home and he used white which looks like wood on the edge between bath tub and wall. But before he put it there he Sprayed something on that which I believe was some sort of glue because he did not use any adhesive. what sort of glue that is and was where can I get that. And was that really wood he put there. Thanks in advance.

metre squared

Thin bricks, brick veneers, brick fascias, cladding ...

Answers

1 to 2 of 2

Best Answer

No best answer has yet been selected by keyplus90. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Dudemcc

You can get sealant with anti fungus in it from all diy stores.
Remember to fill the bath with water before sealing, if you do it dry the sealant will split when the bath settles with the weight in it once filled.

keyplus90

Question Author

Thank you very much Dudemcc. I posted this in May so you must have gone long way back to answer this. Really appreciated.

1 to 2 of 2

Do you know the answer?