Donate SIGN UP

PAT testing of appliances

Avatar Image
tony1941 | 13:23 Wed 21st Sep 2011 | How it Works
5 Answers
Does anyone know the actual rules about this?? I keep getting told that it must be carried out by a "qualified electrician". As I read the site http://www.pat-testing.info/ it seems that it needs only a "competent" person, ie. one who understands what the potential problems are and what is acceptable for meter readings. I have just started out helping in a charity shop, and they are paying some "electrician" £1.50 for ever plug he looks at and labels "OK". He even charged for labelling a 12V car polisher which convinced me there is a scam going on.
Also I can't see where the regulations say you must use a special "PAT Tester" instrument.
All this arises as I have C&G 2391 which qualifies me as an inspector and tester of electrical installations (in the past I have done whole railway station tests!!) but everyone thinks I must have some stupid PAT Test bit of paper! - I don't think it exists.
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by tony1941. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
No specific qualifications are required to under take the PAT testing, rather that they must be competent to do so. However a City & Guilds 2377 - Inspection and Testing of Electrical Equipment, qualification is available. The City & Guilds 2377 course has been designed jointly by the IEE and City & Guilds.

found that, here

http://www.pat-testing.info/training.htm
I reckon Fluffybum is right there, Tony. I have the Domestic Installer (DISQ) qualification, and I'd be confident of PAT testing. Your 2391 goes a lot further than my qualification. You should be well qualified.
I tried to find a place on a course for the C&G 2377 qualification, which is specifically designed to certify proficiency in PAT testing among people who are NOT fully qualified electricians. But every college I approached stated that they only accepted fully qualified electricians onto the course! Grrrr!

Chris
I'm the competent person where I work (laughable I know :))

All I had to do was a one day training course in how to use the tester and how to interpret the readings, complete a short test and walk out with a certificate.

The certificate even means that I'm not allowed to nominate other people that I regard as competent to actually do the testing (this is good as it's a really boring job!)

Although charging to test a 12v car polisher sounds a little dodgy, unless it has a charger, in which case the charger should be tested (probably as a class2 device) not the polisher.
Also, "PAT testing of appliances" is one of the most tautological phrases I've seen for ages :)

1 to 5 of 5rss feed

Do you know the answer?

PAT testing of appliances

Answer Question >>