Hypocrisy Of The Highest Order?
News0 min ago
Can this Denon be used with 20 watt, 4 ohm speakers? I read somewhere that there is less damage to speakers from an overpowered amp than an underpowered amp (not that I have looked at the amp yet) https:/
Looking at the back of that unit, it states speaker impedance should be 6 to 16 ohms. Yours are 4 ohms, and it's not usually a good idea to use a lower value than stated on the amplifier.
(Very good choice of unit btw. I'd be thinking of matching with other speakers from Richers range..probably 8 ohm. They'll give you very good advice if you ask.)
See here:
https:/
With the risks of overheating the mini system, or of blowing the speakers, I'd rather not try it myself.
Thanks for the replies. I wanted to keep my little cherrywood JVC speakers that came with a UX-7000 microsystem bough in Singapore years ago. I did go into Richer's with a view to buying a Ruark R3s. I`m a bit averse to buying all in one systems though. It's on a small(ish) chest of drawers which is why I don't want anything too big. I have a DAB adaptor which I have added on but my favourite DAB station has moved to DAB+ so it's time to think about other options.
To deliver 30W into 6 ohms requires an amplifier output voltage of 13.4V rms.
If you were to replace the speaker with one having a 4 ohm impedance, the power delivered into the speaker by 13.4V rms would be 45W – which would almost certainly destroy the 20W speakers.
To dissipate 20W into 4 ohms requires an amplifier output voltage of 8.9V rms – therefore if you ensure that you never turn the volume control to more than 2/3 maximum (with 4 ohm speakers) you should be OK.
Bear in mind that 2 x 20W rms from a stereo system will be quite loud – if you live in a flat it will certainly annoy your neighbours.
Th answer is yes. When you hear distortion turn it down a bit. But you will not realise its potential with those spec speakers.
I just read the What Hi-Fi report and they say that the best speakers for it are Denon ones.
I really think you are wasting its quality with your speakers.
I had a previous Denon like this prior to switching to Sonos and I used Mordant Short MS10s. OMG, such a lovely sound!