Donate SIGN UP

stylus colour 500

Avatar Image
jafattz@hotm | 20:33 Mon 15th May 2006 | Technology
3 Answers

I have just fitted a new colour cartridge to my printer and the colour ink out light has come on.It's a new cartridge and it is full. This epson doesn't have a chip so a resetter isn't needed. It just wont print in colour.Any help would be appreciated


Thanks Jim

Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by jafattz@hotm. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
might sound simple but did you pull off the protective tape correctly.............or try a head clean...........take it out and try again...........commoner.

...clutching at straws really but I have always had Epson printers and never seen that problem.
Hi again...........here's a quote from a help website which more or less says what I did............


"I just installed the ink cartridges and both of the Ink Out lights are on solid. How can I clear my printer?

Make sure that the cartridges were installed correctly. Follow the procedures for installing cartridges as shown on the inside of the printer cover, but DO NOT remove the ink cartridges. Lift the ink cartridge clamp on both cartridges and ensure that the yellow tape seal has been completely removed from the top of each cartridge. Also, make sure you are using a genuine EPSON ink cartridges which have white labels on top of them. Do not install any cartridge from which the white label has been removed. Using an ink cartridge which does not have the white label on it may damage the printer. If you have already installed a cartridge which is missing the white label, or if a previously installed ink cartridge was missing its white label at the time it was installed, and now head cleanings do not help the demonstration page or self test to print completely, your printer may require a service. Close the clamps until they snap into place, ensuring you have broken the seals. Press the Load/Eject button to begin charging the ink delivery system. If reclamping the cartridges does not resolve the problem, replace the ink cartridges with new genuine EPSON cartridges. If you continue to have difficulties, the printer may need to be sent in for a service."
Send it back - I did and got a replacement.

1 to 3 of 3rss feed

Do you know the answer?

stylus colour 500

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.