Quizzes & Puzzles11 mins ago
Laptop Chargers -
1 Answers
i have 2 laptop chargers - one is an old one and one is for my current laptop
the laptop ones is 19v - and the older one is 18.5v
can i use the 18.5v one with the 19v laptop?
i know using a higher output would ruin the machine - but does a lower one break it?
will it even work?
dont want to test it just in case
thanks
the laptop ones is 19v - and the older one is 18.5v
can i use the 18.5v one with the 19v laptop?
i know using a higher output would ruin the machine - but does a lower one break it?
will it even work?
dont want to test it just in case
thanks
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by joko. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
The 18.5V one would probably work.
However (assuming that it's the same type of plug at the laptop end of the cable in the first place) you need to check that the tip polarity is the same way round. (e.g. I've just looked at the charger unit for my netbook. The markings on it show that the inner part of the tip is positive and the outer part negative). If it was the wrong way round and the laptop's manufacturer had fitted a protection diode, it simply wouldn't provide any power to the laptop. If it was the wrong way round and the laptop's manufacturer had saved a penny or two by omitting that diode you'd ruin the laptop.
Further, and very importantly(!), you'd need to check that the current rating of the 18.5V charger was at least as high as that of the 19V one (it wouldn't matter if it was higher). If the 18.5V charger was asked to provide more current that it was intended to do it would overheat and burn out.
However (assuming that it's the same type of plug at the laptop end of the cable in the first place) you need to check that the tip polarity is the same way round. (e.g. I've just looked at the charger unit for my netbook. The markings on it show that the inner part of the tip is positive and the outer part negative). If it was the wrong way round and the laptop's manufacturer had fitted a protection diode, it simply wouldn't provide any power to the laptop. If it was the wrong way round and the laptop's manufacturer had saved a penny or two by omitting that diode you'd ruin the laptop.
Further, and very importantly(!), you'd need to check that the current rating of the 18.5V charger was at least as high as that of the 19V one (it wouldn't matter if it was higher). If the 18.5V charger was asked to provide more current that it was intended to do it would overheat and burn out.
Only 1 answer
