News2 mins ago
What is wrong with my tumble dryer?
10 Answers
I have a Hotpoint VTD00P vented tumble dryer, which i have positioned in a cupboard. I have been using it for a few weeks now and water has started to leak through the door. Also, the cupboard is now warped and amp has started to appear. Any ideas? Am i doing something wrong?
Answers
Best Answer
No best answer has yet been selected by karltop. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.erh em:
'The Dryer dries your laundry by drawing in cool, clean
and relatively dry air, heating it, and then distributing
it through the clothes as they are gently tumbled. For
optimum performance, the moist air is then blown out
through a vent tube at the back of the dryer.
When the dryer is in use, there has to be adequate
ventilation to avoid the back flow of gases into the room
from appliances burning other fuels, including open fires.'
says it all really
'The Dryer dries your laundry by drawing in cool, clean
and relatively dry air, heating it, and then distributing
it through the clothes as they are gently tumbled. For
optimum performance, the moist air is then blown out
through a vent tube at the back of the dryer.
When the dryer is in use, there has to be adequate
ventilation to avoid the back flow of gases into the room
from appliances burning other fuels, including open fires.'
says it all really
just in case this isn't a wind-up
As stated, the air has to come from somewhere - it comes into the machine from underneath. This area needs to be kept open to allow air in.
Next, it has to leave. The pipe that the hot air comes out of also contains all of the water vapour. That needs to leave your house through a vent through an outside wall or if necessary through a window - ie the hose needs to end outside the building.
If your dryer hasn't got the hose attached, or if the hose ends inside the cupboard -which is what i think you're saying - you will get damp and the wood will warp from continuous hot wet air being pumped into it, and the 'leak' you're seeing is extreme condensation.
As stated, the air has to come from somewhere - it comes into the machine from underneath. This area needs to be kept open to allow air in.
Next, it has to leave. The pipe that the hot air comes out of also contains all of the water vapour. That needs to leave your house through a vent through an outside wall or if necessary through a window - ie the hose needs to end outside the building.
If your dryer hasn't got the hose attached, or if the hose ends inside the cupboard -which is what i think you're saying - you will get damp and the wood will warp from continuous hot wet air being pumped into it, and the 'leak' you're seeing is extreme condensation.