Quizzes & Puzzles3 mins ago
White gold
I just wondered if there was a way of preventing my white gold ring from reverting back to its yellow gold colour. I vaguely remember in my chemistry lessons at school learning about how steel ship had some copper(?) slabs stuck to it so that the copper would erode instead of the steel rusting. Something to do with the copper needing the electrons more than the iron.
So I was wondering if the same could be applied to my ring. Is there a piece of metal that could be used to prevent my ring from tarnishing in the same way?
Thank you!
So I was wondering if the same could be applied to my ring. Is there a piece of metal that could be used to prevent my ring from tarnishing in the same way?
Thank you!
Answers
Best Answer
No best answer has yet been selected by Pebbilita. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.This is a common problem. Ships, oil rigs, and other metallic structures can have 'sacrificial anodes' attached. But note that these are used where the structures are in contact with water - unlike your hand - so they aren't the answer. There's lots of links to this problem on Google. Have a browse here...
http://www.google.co....e+gold+turning+yellow
http://www.google.co....e+gold+turning+yellow
White gold is actually an alloy of gold and nickel or palladium.
It is rhodium plated to give it the right colour, unfortunately that rhodium plating wears over time and has to be redone
http://en.wikipedia.org/wiki/Colored_gold
It's a different principle from that of using a sacrificial metal like copper or zinc to protect steel as it's effectively physical wear that is erroding the coating.
It is rhodium plated to give it the right colour, unfortunately that rhodium plating wears over time and has to be redone
http://en.wikipedia.org/wiki/Colored_gold
It's a different principle from that of using a sacrificial metal like copper or zinc to protect steel as it's effectively physical wear that is erroding the coating.
That is the first I've heard of it. A metal should be the same all the way through. Sounds a bit of a con to me. Call it white due to the impurities, and yet it's only really white because of a plating, and is yellow underneath ? How come the advertising standards authority isn't up in arms about this, how come jewellers are not being sued on a daily basis for mis-representation/selling ? Is it yet another swindle allowed to be played on the public ?
Well, OG, a 9 ct gold ring is only 9/24ths gold, yet it's still legally described as a gold ring. A ''white gold'' ring doesn't have to be plated, but instead can get its near-white colour solely from the nickel and/or palladium with which the gold is alloyed. And if the result is a ring that's 9/24ths pure gold, what's the difference?
-- answer removed --
The carat value isn't the issue. Being told you are buying one thing only to find it is another, is. I don't accept an explanation that 'impurities' can all be in a thin coating on the surface, so that makes it ok. If you buy an alloy then the distribution of the various constituent materials should be the same throughout the item, as far as is practically possible. Otherwise the fact it is not should be clearly indicated. I'm appalled this sort of pulling the wool over the consumer is apparently allowed. But I'm not really surprised.
-- answer removed --