Remove Suction Nozzle On A Karcher Wv1 Window Vac.

Atheist | 13:47 Tue 31st Dec 2024 | How it Works

2 Answers

I just bought the above and clipped the nozzle into place easily enough. Now I can't remove it. The only instruction is a diagram showing a screwdriver apparently being pushed into a little hole just below the underside of the nozzle. But I'm scared of poking in there - there's no indication that the screwdrive should be turned, just poked in.

Does anyone know how to go about this?

Bleeding A Radiator Query?

Parker Pen Refills.

Answers

1 to 2 of 2

Best Answer

No best answer has yet been selected by Atheist. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

THECORBYLOON

I've had a look at the picture on the guide and it just looks like a pin you need to push down to release the nozzle (so a small screwdriver or a metal skewer would do) and then pull the nozzle off.

Atheist

Question Author

Thanks. Corby. I'm thinking the same but thought I'd check it out before probing. I don't really need to remove the nozzle (unlike the WV2 which needs it to allow emptying the water reservoir); If the need arises I'll just take a chance and see what happens.

1 to 2 of 2

Do you know the answer?