Quizzes & Puzzles2 mins ago
Epson C62
How do you clean the print heads on Epson C62 when using XP?
Answers
Best Answer
No best answer has yet been selected by koiman. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I don't own an Epson printer and I don't use XP but, to the best of my knowledge, the following should work with all printers and with all versions of Windows:
Go to the Printers folder. (It's probably accessed from the Start menu or via the Control Panel).
Right-click on the icon for the Epson C62 printer.
Click on Properties.
Click on the 'Maintenance' tab.
Follow the on-screen instructions.
Chris
Go to the Printers folder. (It's probably accessed from the Start menu or via the Control Panel).
Right-click on the icon for the Epson C62 printer.
Click on Properties.
Click on the 'Maintenance' tab.
Follow the on-screen instructions.
Chris
I don't give up that easily!
Try this:
Turn the printer on.
Hold the middle button down for 3 seconds and release.
(If you accidentally release it too early, it will start to feed a sheet of paper. If so, press it briefly again, to eject the paper, and then hold it down for 3 seconds).
The power light will start flashing. Don't do anything until it stops.
The print heads have now been cleaned but, obviously, you'll want to check that the cleaning has been effective. Here's how to check the print head nozzles:
Turn the printer off.
Make sure there's some paper in it.
Hold down the middle button and keep it held down.
Press the left hand button to turn the printer on. Release this button only.
Wait until the printer starts to print a test sheet, then release the centre button.
This will produce a test pattern. If the colour blocks are sold colours, that's it. If there's still banding, repeat the head cleaning process.
If the banding doesn't clear after 4 or 5 attempts, turn the printer off and leave it overnight. Then repeat the process for checking the print nozzles. If necessary, repeat the cleaning process.
All of this has been summarised from the information, under 'How to' and then 'Using the Control Panel Buttons', here:
http://support.epson-europe.com/onlineguides/e n/sc62/index.htm
Chris
Try this:
Turn the printer on.
Hold the middle button down for 3 seconds and release.
(If you accidentally release it too early, it will start to feed a sheet of paper. If so, press it briefly again, to eject the paper, and then hold it down for 3 seconds).
The power light will start flashing. Don't do anything until it stops.
The print heads have now been cleaned but, obviously, you'll want to check that the cleaning has been effective. Here's how to check the print head nozzles:
Turn the printer off.
Make sure there's some paper in it.
Hold down the middle button and keep it held down.
Press the left hand button to turn the printer on. Release this button only.
Wait until the printer starts to print a test sheet, then release the centre button.
This will produce a test pattern. If the colour blocks are sold colours, that's it. If there's still banding, repeat the head cleaning process.
If the banding doesn't clear after 4 or 5 attempts, turn the printer off and leave it overnight. Then repeat the process for checking the print nozzles. If necessary, repeat the cleaning process.
All of this has been summarised from the information, under 'How to' and then 'Using the Control Panel Buttons', here:
http://support.epson-europe.com/onlineguides/e n/sc62/index.htm
Chris