ChatterBank1 min ago
Wireless connection to laptop but no connection to main computer?
Hello,
I have my main computer wired up for internet connection. Trouble is, its been working fine but now for about 2 weeks the connection is lost to this main computer! However, I can connect to the connection with my laptop wirelessly. How can my laptop connect but not my computer? I dont understand :(
I have my main computer wired up for internet connection. Trouble is, its been working fine but now for about 2 weeks the connection is lost to this main computer! However, I can connect to the connection with my laptop wirelessly. How can my laptop connect but not my computer? I dont understand :(
Answers
Best Answer
No best answer has yet been selected by k8_doran. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.aren't we missing the second most obvious cause here?
it's plugged in - it doesnt work - it's either the card or the cord that's faulty (or disabled)
(and switching the router off won't reset a broken cord!!)
my money is on the cord
quick way to check
on the desktop go to control panel (XP?)
open system | hardware | device manager - can you see the network card in the network adapters?
open network connections
you'll see your network card there (lan or highspeed 10/100/1000 .... not the 1394)
it should say connected
double click the icon
goto the support tab and repair the connection
(also note down the numbers in connection status the IP address should NOT start with 169)
go back to the general tab
press properties
tick the show icon in notification area and notify me .... no connectivity
ok
close
if the cord is ok - you'll get a ikkle icon
if not - 99% certain it's down to PC world for a new (straight) ethernet cable (�5.00 - �10.00)
if you want to be absolutely certain
open a command prompt
type ipconfig /all - (the ip address should be 192.168.x.x NOT 169.x.x.x)
you should also have a gateway
now still at the commend type ping 127.0.0.1
and then ping <enter the gateway numbers>
then come back with the results
it's plugged in - it doesnt work - it's either the card or the cord that's faulty (or disabled)
(and switching the router off won't reset a broken cord!!)
my money is on the cord
quick way to check
on the desktop go to control panel (XP?)
open system | hardware | device manager - can you see the network card in the network adapters?
open network connections
you'll see your network card there (lan or highspeed 10/100/1000 .... not the 1394)
it should say connected
double click the icon
goto the support tab and repair the connection
(also note down the numbers in connection status the IP address should NOT start with 169)
go back to the general tab
press properties
tick the show icon in notification area and notify me .... no connectivity
ok
close
if the cord is ok - you'll get a ikkle icon
if not - 99% certain it's down to PC world for a new (straight) ethernet cable (�5.00 - �10.00)
if you want to be absolutely certain
open a command prompt
type ipconfig /all - (the ip address should be 192.168.x.x NOT 169.x.x.x)
you should also have a gateway
now still at the commend type ping 127.0.0.1
and then ping <enter the gateway numbers>
then come back with the results