ChatterBank1 min ago
Actual memory in storage device
6 Answers
I just bought a 1 terabyte desktop storage device. When plugged in the space shown on the disk was 931 gB. Now I know that devices may use some memory in running - but 93 gB? That's nearly the size of my 'c' drive!
Is this normal?
Is this normal?
Answers
1 to 6 of 6
Best Answer
No best answer has yet been selected by Kelvin. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Computers use binary and counting tends to be grouped as follows:
2, 4, 8, 16, 32, 64, 128, 256, 512, 1024
This is why digital devices (like memory cards) are often 256 or 512 in size for example.
But when you get to 1024 people often show it as 1k.
Of course 1024 is very near 1,000, so when people talk about something being 1k (1 thousand) they actually mean 1024.
So if a file on your hard disk was said to be 1k it may actually be 1024 bytes and you have already "lost" 24 bytes.
So even at those low numbers you can get confusion between if 1k means 1,000 or 1024.
Now expand that to talk about megabytes, or gigabytes or terabytes.
When they say 1Tb do they mean 1Tb based on 1,000 or 1024?
So as that wiki article points out, disk makers talk about 500Gb disks or 1Tb disk, but tend to "round up" to keep it simple.
And that way you think you have lost a lot of your hard disk.
2, 4, 8, 16, 32, 64, 128, 256, 512, 1024
This is why digital devices (like memory cards) are often 256 or 512 in size for example.
But when you get to 1024 people often show it as 1k.
Of course 1024 is very near 1,000, so when people talk about something being 1k (1 thousand) they actually mean 1024.
So if a file on your hard disk was said to be 1k it may actually be 1024 bytes and you have already "lost" 24 bytes.
So even at those low numbers you can get confusion between if 1k means 1,000 or 1024.
Now expand that to talk about megabytes, or gigabytes or terabytes.
When they say 1Tb do they mean 1Tb based on 1,000 or 1024?
So as that wiki article points out, disk makers talk about 500Gb disks or 1Tb disk, but tend to "round up" to keep it simple.
And that way you think you have lost a lot of your hard disk.
Disc mfrs work in denery - the rest of the computer world work in binary
so yes 1k = either 1000 or 1024
however that's not where the space has gone
when it's formatted the program creates a
a partition table - describes the size of the disc/partition
a master boot file - to say look at this drive for the boot files
a master file table (in dos was the fat)
to store files the disc is split into lots of little boxes
files are split into box sized chunks
each file uses the first box
the address of this box is stored in the mft database so it can be found later
if the file is big enough - it spills into more boxes
subsequent boxes are chained together each "next box" is added to the end of each data chunk so when the file is read the head jumps from one box to the net until it sees an end of file marker
the whole MFT is created during formatting
the size of the disc is used to calculate how many boxes can be created ... and how many entries the MFT will need
it then reserves part of the disk to be used as a database of where the start of each file you store is located. (this table is a fixed size - so it doesn't matter if you store 1000 1Gb files or 1000000000s of 1k files - the system will have reserved enough space to make entries available for both)
1Tb is pretty big - so the database has to be big
and so you loose a fair chunk of discspace to all the system files needed by the disc itself
so yes 1k = either 1000 or 1024
however that's not where the space has gone
when it's formatted the program creates a
a partition table - describes the size of the disc/partition
a master boot file - to say look at this drive for the boot files
a master file table (in dos was the fat)
to store files the disc is split into lots of little boxes
files are split into box sized chunks
each file uses the first box
the address of this box is stored in the mft database so it can be found later
if the file is big enough - it spills into more boxes
subsequent boxes are chained together each "next box" is added to the end of each data chunk so when the file is read the head jumps from one box to the net until it sees an end of file marker
the whole MFT is created during formatting
the size of the disc is used to calculate how many boxes can be created ... and how many entries the MFT will need
it then reserves part of the disk to be used as a database of where the start of each file you store is located. (this table is a fixed size - so it doesn't matter if you store 1000 1Gb files or 1000000000s of 1k files - the system will have reserved enough space to make entries available for both)
1Tb is pretty big - so the database has to be big
and so you loose a fair chunk of discspace to all the system files needed by the disc itself
1 to 6 of 6
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.