ChatterBank2 mins ago
wireless connection
10 Answers
I don't know much about the technical stuff with computers. I have 2 laptops and 1 desktop pc and a virgin broadband connection. I bought a TP-Link TL-WR641G wireless router and I can link it to my desktop as long as I use a LAN connection but neither laptop can detect the signal. They are both wireless enabled and I keep picking up signals from other networks so they are working ok but I cannot get anywhere with my own connection. Can somebody please talk me through setting up - using only idiotproof terms? thanks
Answers
Best Answer
No best answer has yet been selected by karenmac60. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
Yes, I agree. You can download a user guide from here http://www.tp-link.com/support/download.asp?a= 1&m=TL-WR641G
I've followed the instructions as much as I can understand them, but like I said, I don't know much about the technical side of things - all the jargon is getting me very confused. That said, that's more about security settings and what not, I can understand the basics for plugging what in where etc, but it's just not working.
kar
you don't say which operating system(s) are involved - so it's not easy to be specific ...
and which make/models of pc/laptop are involved
how old / which wireless
the info you need from the router is the ssid
and the wep or wap key
http://www.tp-link.com/english/soft/2008651404 22.pdf
page 27 is the start of the wireless section
you can change the ssid (p28) to something that fits you
karenmac would be fine - and easy to spot
wep is good enough for most situations
if there is no key - set one up (p31)
make sure the mode (p29) is set to
54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the
Wireless Router SSID will broadcast its name (SSID) on the air
if that still doesn't work try mode
11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router
in control panel there should be a wireless network setup wizard (XP) and something similar in Vista
run the wizard
display available networks (the one that matches your ssid)
then when asked enter the wep key ... and that should be it
vas why on earth would a router manual tell you how windows works ... and why would you post a link without checking that it did
lucy is just a simple troll - no problem - just a stupid remark with no promise of help - I've been known to use this approach myself
you on the other hand promise help - but don't give it ... not good
you don't say which operating system(s) are involved - so it's not easy to be specific ...
and which make/models of pc/laptop are involved
how old / which wireless
the info you need from the router is the ssid
and the wep or wap key
http://www.tp-link.com/english/soft/2008651404 22.pdf
page 27 is the start of the wireless section
you can change the ssid (p28) to something that fits you
karenmac would be fine - and easy to spot
wep is good enough for most situations
if there is no key - set one up (p31)
make sure the mode (p29) is set to
54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the
Wireless Router SSID will broadcast its name (SSID) on the air
if that still doesn't work try mode
11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router
in control panel there should be a wireless network setup wizard (XP) and something similar in Vista
run the wizard
display available networks (the one that matches your ssid)
then when asked enter the wep key ... and that should be it
vas why on earth would a router manual tell you how windows works ... and why would you post a link without checking that it did
lucy is just a simple troll - no problem - just a stupid remark with no promise of help - I've been known to use this approach myself
you on the other hand promise help - but don't give it ... not good
-- answer removed --
in these days of bridges under the hammer, arch swap and how dirty is your bridge with prim and hagged -
the old accomodation issues don't always apply
these days it's all keeping up with the gnomes, fairy pride etc ...
however if it talks like a troll (yoof speak has even intruded there innit?) ... and answers in two lines or less - it generally is
the old accomodation issues don't always apply
these days it's all keeping up with the gnomes, fairy pride etc ...
however if it talks like a troll (yoof speak has even intruded there innit?) ... and answers in two lines or less - it generally is
-- answer removed --
I make it 3 lines
look at your post
but I've never denied it either (look at the nym)
ACtheTROLL - sort of gives it away wouldn't you think?
perhaps LucyThomas7 - should be LucyTrollmas7?
I guess 7 is your age ... or IQ?
don't you realise the longer you keep this thread up - the more you confirm your love of bridges
look at your post
but I've never denied it either (look at the nym)
ACtheTROLL - sort of gives it away wouldn't you think?
perhaps LucyThomas7 - should be LucyTrollmas7?
I guess 7 is your age ... or IQ?
don't you realise the longer you keep this thread up - the more you confirm your love of bridges