Quizzes & Puzzles5 mins ago
can you join 2 routers ?
Hi peeps,
my mate has broken his adsl wireless router and cannot aford to replace it at the moment, he has two spare routers one is an adsl netgear (nonwireless) the other is an ethernet linksys (wireless) is it poss to plug the adsl cable into the netgear run an ethernet rj45 from port 1 of the netgear to the wlan of the linsys and transmit a wireless connection from the liksys to his laptop etc. He has not tried yet as he is afraid of messing up either routers as they might need configuring to talk to each other, any help much app thanks in advance for any replies
my mate has broken his adsl wireless router and cannot aford to replace it at the moment, he has two spare routers one is an adsl netgear (nonwireless) the other is an ethernet linksys (wireless) is it poss to plug the adsl cable into the netgear run an ethernet rj45 from port 1 of the netgear to the wlan of the linsys and transmit a wireless connection from the liksys to his laptop etc. He has not tried yet as he is afraid of messing up either routers as they might need configuring to talk to each other, any help much app thanks in advance for any replies
Answers
Best Answer
No best answer has yet been selected by fatgaz. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.BTW.....
I'm assuming when you say "ethernet linksys" you mean it's a cable router?
If so to clarify...
Ignore the cable (WAN) port on the lynksys all together and use the normal LAN ports to connect the two together, before doing this though, connect a computer to one of the lan ports on the lynksys, preferably set the computer to a static IP in the range the lynksys allocates, log into the lyncsys setup pages, firstly disable DHCP, then optionally change the IP address of the lynksys router to one in a different range than the netgear (you'll loose connection to the router as this point)
Then simply connect the two together using a ethernet cable (again using the LAN ports, not the WAN port!), make sure you put the computer back onto obtain IP address automatically and connect it wireless, the netgear will then supply DHCP and will be set as the gateway and the lynksys will just act as a wireless switch.
Connecting them using the WAN port on the lynksys without making any changes would result in getting double NAT, which although it would appear to work would cause problems with some services (such as VOIP)
I'm assuming when you say "ethernet linksys" you mean it's a cable router?
If so to clarify...
Ignore the cable (WAN) port on the lynksys all together and use the normal LAN ports to connect the two together, before doing this though, connect a computer to one of the lan ports on the lynksys, preferably set the computer to a static IP in the range the lynksys allocates, log into the lyncsys setup pages, firstly disable DHCP, then optionally change the IP address of the lynksys router to one in a different range than the netgear (you'll loose connection to the router as this point)
Then simply connect the two together using a ethernet cable (again using the LAN ports, not the WAN port!), make sure you put the computer back onto obtain IP address automatically and connect it wireless, the netgear will then supply DHCP and will be set as the gateway and the lynksys will just act as a wireless switch.
Connecting them using the WAN port on the lynksys without making any changes would result in getting double NAT, which although it would appear to work would cause problems with some services (such as VOIP)
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.