Crown Satin Wood Paint.

Zubar | 23:40 Tue 08th Sep 2015 | Home & Garden

6 Answers

Hi,
I redecorated our lounge the week before last and yesterday the new carpet was laid. When the carpet was put down some of the paint on one length of skirting kind of rubbed off, leaving areas of the skirting with flakes of paint on the surface of the skirting board. I know this Crown Satin Wood Paint is not an oil based gloss paint, so I guess this makes it less durable ? Or was the problem caused by me spreading the paint too thinly? When I ran a wet cloth along the skirting board it was covered with paint flakes, so I guess all I can do is remove the loose paint and then paint over it again ? Has anybody else had any problems when using this particular paint ?
Many Thanks, Zubar.

Leaky Flat Roof

Red Robin Pruning

Answers

1 to 6 of 6

Best Answer

No best answer has yet been selected by Zubar. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

SirOracle

What ,if any,undercoat did you use Zubar.?

silliemillie

The same happened to me Zubar, it rubbed of when I wiped a mark off the door. Wouldn't use it again.

alavahalf

Think about it .. you get oil based paint on your hands, it's fairly easy to remove, even when it's dry. Get water based paint on your hands, three days later it will still be there.
Dulux satinwood has the ability to stick like the preverbial to a blanket !
If your paint comes of with a damp cloth then your problem is down to the top coat having a poor surface to bond to.

Sorry.. but the end result is only as good as the preparation.

Retrochic

perhaps the skirting had preciously been painted in an oil based paint. If you did not sand the surface before painting then the paint had nothing to grip onto. All our paintowrk is painted with crown satin wood and I've had no problems washing them even with bleach based products.

Zubar

Question Author

Hi, the skirting had orginally been painted in Crown Satin Wood Paint, so didn't feel an underocat was required. I just felt it was strange that the other 3 lengths of shirting in the room had not been affected in this way. I will sand the affected area of skirting down and start again.
Mnay Thanks,
Zubar.

mastercraft

In order for any paint (oil/water based) to adhere, the surface should be clean and have a KEY. A light rub down with 180 grade paper on clean woodwork will provide this.

Alavahalf mentioned it earlier, but got his paint sticking theory the wrong way round.

1 to 6 of 6

Do you know the answer?