Donate SIGN UP

Sky +No signal quality bar on Input 2

Avatar Image
conman | 20:14 Thu 24th Nov 2005 | Technology
2 Answers

May need an expert on this !!Pace box,been back to Pace said ok.Upgraded to Region 2 dish was massive improvement now some picture pixellation on recordings. Hadnew LNB .Aerial meter tested, no line of sight obstructions. HELP!!

Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by conman. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

i had a problem with mine recently which also left me with no input 2 signal.got the engineers out and they unscrewed both signal leads from the back and one was heavily corroded(input 1 bizarrely).they clipped it back by a few inches until the lead was good and then re-fitted the plug.all was fine.my problem was a break in the sleeving on the wire on the outside of my house which had let water in.i squeezed as much excess water as i could from the sleeve then wound insulating tape around the cut to seal it.have had no problems since.


its a long shot but you may also have this problem.sky will charge �50 to come out and fix the problem but at least they will solve it and then guarantee that fix for 3 months minimum.

If you are experiencing pixellation on when watching recordings but everything else is fine, it could be the disk in the Sky + box. Try doing a full reset using the installer menu and see if that helps. (It will format the disk so watch all programs first!!)

1 to 2 of 2rss feed

Do you know the answer?

Sky +No signal quality bar on Input 2

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.