Quizzes & Puzzles1 min ago
Scanning process freezes
4 Answers
My technical level is low, having not grown up with computers. I have an iMac G5 PowerMac8,2 with OS X Version 10.4.7. A USB cable connects my Epson Stylus CX6400 (printer/scanner/copier) to the computer. Until recently, scanning worked fautlessly. Printing still works fine. I scan documents on the flatbed using Image Capture; mostly the documents are A4 size and I set the resolution to 300dpi thus the size of the files created are in MB rather than KB.
Now, when attempting to scan a document, Image Capture still obtains and displays a preview successfully, but, after selecting the desired area and adjusting the scan settings, and then clicking on Image Capture's scan button, the scanning process starts and then stops very soon afterwards. Both Image Capture and the scanner seem to 'freeze'. Image Capture's scan progress bar disppears, and the scanner's LCD display continues to display 'Scanning...'. I've tried leaving all alone for many minutes but nothing further happens.
The scanner returns to 'ready' status only if I disconnect it from the power supply, reconnect it and switch it on. Image Capture will only unfreeze and recommence 'preview' (which it is set to do automatically upon opening, because I only use it for scanning) after I have quit the application and then re-opened it. I have also tried restarting my computer but this hasn't made any difference.
Any help would be greatly appreciated, thanks.
Now, when attempting to scan a document, Image Capture still obtains and displays a preview successfully, but, after selecting the desired area and adjusting the scan settings, and then clicking on Image Capture's scan button, the scanning process starts and then stops very soon afterwards. Both Image Capture and the scanner seem to 'freeze'. Image Capture's scan progress bar disppears, and the scanner's LCD display continues to display 'Scanning...'. I've tried leaving all alone for many minutes but nothing further happens.
The scanner returns to 'ready' status only if I disconnect it from the power supply, reconnect it and switch it on. Image Capture will only unfreeze and recommence 'preview' (which it is set to do automatically upon opening, because I only use it for scanning) after I have quit the application and then re-opened it. I have also tried restarting my computer but this hasn't made any difference.
Any help would be greatly appreciated, thanks.
Answers
Best Answer
No best answer has yet been selected by Robert G. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Have you tried using the epson software which came with the printer? I would try that. Also did it only go wrong when you upgraded to 10.4.7? Also check out the Apple discussion boards here http://discussions.apple.com/forum.jspa?forumI D=756
Hope this helps
Hope this helps
Are you sure the software doesn't work for Mac OS X?
I've just looked and there seems to be a driver and software available for it. I'd recommend downloading it, because it may well be newer than the software that was supplied when you bought the printer.
I've just looked and there seems to be a driver and software available for it. I'd recommend downloading it, because it may well be newer than the software that was supplied when you bought the printer.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.