Film, Media & TV1 min ago
Auto Reboot?
9 Answers
Is it possible to change the settings on my PC to automatically reboot if a powercut occurs?
Thank you!
Thank you!
Answers
Best Answer
No best answer has yet been selected by Rharris9585. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Some rather silly answers here from graham1024uk. Most modern computers have a setting in the BIOS which allows you to select the behaviour after a power cut. There are usually 3 choices: On, Off, and Last State. Exactly where you will find the settings varies from BIOS to BIOS, but you should be able to work out where it is. As long as you don't change anything you don't understand, there is nothing to worry about.
I tried to find the BIOS, but couldn't anyway. Sounds as though I'd be better off leaving it alone anyway...
I left my office last week with the base unit on and the monitor off (allowing me to access remotely), it was OK up until this morning. However, having gone to the office, the base unit was off, hence why I couldn't remotely access. Can only think there must have been a power cut overnight...?
Anyway, remote access is now working again. Just hope the base unit doesn't switch itself off every couple of days. That was my concern.
Thanks for the advice everyone, I'll be back if anymore problems with it!
I left my office last week with the base unit on and the monitor off (allowing me to access remotely), it was OK up until this morning. However, having gone to the office, the base unit was off, hence why I couldn't remotely access. Can only think there must have been a power cut overnight...?
Anyway, remote access is now working again. Just hope the base unit doesn't switch itself off every couple of days. That was my concern.
Thanks for the advice everyone, I'll be back if anymore problems with it!