Donate SIGN UP

Epson R300 Printer

Avatar Image
lilacben | 14:37 Thu 12th Jun 2008 | Technology
4 Answers
My Epson printer R300 will not load paper straight but off to the right hand side . I have looked inside when the paper is loading and it looks like the second roller on the left isnt as free as the others and the paper gets caught.The ink also smudges on the paper. When the paper comes through in the end there is a hard line pressed in the paper as it has gone through the roller. Cannot see any thing under the roller. Has anyone any idea what it can be.? many thanks
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by lilacben. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
paper is horribly destructive stuff.
The problem is probably slipping and not sticking

the best thing for cleaning the rubber wheels of the layer of paper that is almost certainly causing your problem (or challenge!) is (in my opinion anyhow) soapy water.

and we know that water and electrickery don't mix ... and soapy water will corrode the copper tracking ... so you really must be careful here.

literally a couple of drops (no more) of natural soap (the stuff recommended for woolens) in a couple of litres of hot water.

take a clean cotton rag (ex shirt is best) and carefully moisten the rollers....
it will take a few goes (allow 10 seconds (ish) for the water to soak in --- and repeat... don't get impatient ....

after about 10 goes .. you should find that you are starting to penetrate down through the layers of paper dust concrete

eventually you'll be down to rubber.

do them all ... rub again with clean water - allow to dry

and see how it does.
Question Author
Many thanks for your answer. I have just had a look at it and where the paper goes through the roller and bottom of the spindle, or what ever it is called,all away along it is grey but the bit it gets stuck is silver. So it looks like the piece has worn or broken away. That is why the paper sticks. So know not sure what to do.
grey is bad ... but fixable (if paper dust)

I'm not familiar with the innards ... but
silver (shiney?) isn't good if the wheel isn't round - I take it you haven't been fishing out the stuck paper with a macheti?

is it in guarantee?
Question Author
Haha ACtheTROLL no I havent been picking out the paper. Infact there isnt anything stuck in it, no paper.It looks like it has lost a bit of the cover that pushes it in and out.No guarantee it is a few years old now. Think a new one is on the cards dont you.? many thanks for your help.

1 to 4 of 4rss feed

Do you know the answer?

Epson R300 Printer

Answer Question >>