ChatterBank2 mins ago
Hedy Lamarr And Wi-Fi: On Cnn!
9 Answers
CNN's courageous (i.e. totally conventional) reporter Christiane Amanpour (didn't you love her on Brexit night?) discussing a real woman.
Fans of the Listener will know Ms Lamarr because she was a theme two or three years ago. Can't remember the title.
Fans of the Listener will know Ms Lamarr because she was a theme two or three years ago. Can't remember the title.
Answers
1 to 9 of 9
The Listener was called German Serial Composition. The setter was Quinaplus, who had given us some brilliant crossword tools. Lamarr’s patent was for a very basic system that used a mechanical device both the transmitter and at the receiver in the missile to switch frequencies. The two devices had to be synchronised manually before launch. The top...
07:48 Sun 11th Mar 2018
I struggled to make sense of your post but this seems to explain at least some of it:
https:/
https:/
//I struggled to make sense of your post//
I'm surprised, Buenchico.
Amanpour's now on more familiar territory: interviewing Annie Lennox on female empowerment, the #MeToo movement, Donald Trump, *** walks, Pussy marches and why importing rapists into Europe is a good idea.
PS: I made up the last clause.
I'm surprised, Buenchico.
Amanpour's now on more familiar territory: interviewing Annie Lennox on female empowerment, the #MeToo movement, Donald Trump, *** walks, Pussy marches and why importing rapists into Europe is a good idea.
PS: I made up the last clause.
The Listener was called German Serial Composition. The setter was Quinaplus, who had given us some brilliant crossword tools.
Lamarr’s patent was for a very basic system that used a mechanical device both the transmitter and at the receiver in the missile to switch frequencies. The two devices had to be synchronised manually before launch. The top figure shows the transmitter with the device at the bottom rhs selecting a channel, which would select a certain tuned circuit for the variable frequency oscillator, therefore selecting the transmission frequency. The two oscillators at the top of the diagram modify the amplitude of the transmitted signal. So if you want to move the missile left you would modulate the amplitude with a 100hz signal and if you wanted to move it right you would modulate it with a 500hz signal. The receiver does just the reverse. Its mechanical device has selected the same signal so it is on the correct frequency. The detectors pick up the modulation on the received signal which is then filtered and rectified to a DC voltage so that the 100hz or 500hz modulation could be used to turn a motor and alter the direction of the missile left or right.
These days frequency shift tends to be used only where both ends have a transmitter and receiver so that synchronisation information can be passed from one to the other, without the need for any prearranged synchronisation. They basically tell each other where to go next.
Lamarr’s patent was for a very basic system that used a mechanical device both the transmitter and at the receiver in the missile to switch frequencies. The two devices had to be synchronised manually before launch. The top figure shows the transmitter with the device at the bottom rhs selecting a channel, which would select a certain tuned circuit for the variable frequency oscillator, therefore selecting the transmission frequency. The two oscillators at the top of the diagram modify the amplitude of the transmitted signal. So if you want to move the missile left you would modulate the amplitude with a 100hz signal and if you wanted to move it right you would modulate it with a 500hz signal. The receiver does just the reverse. Its mechanical device has selected the same signal so it is on the correct frequency. The detectors pick up the modulation on the received signal which is then filtered and rectified to a DC voltage so that the 100hz or 500hz modulation could be used to turn a motor and alter the direction of the missile left or right.
These days frequency shift tends to be used only where both ends have a transmitter and receiver so that synchronisation information can be passed from one to the other, without the need for any prearranged synchronisation. They basically tell each other where to go next.
1 to 9 of 9
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.