Easy to say now, but any airbrick should have had a simple plastic duct placed in front of it, so that air is taken from the other end of the patio. The pipe would run all the way under the patio.
If (and it's not likely) you can figure out where the hidden vents are, then take up a slab (the one covering the vent), and fit one of these..................
https://www.toolstation.com/9-x-3-telescopic-vent/p38967?store=EX&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gclid=CjwKCAjwgqbpBRAREiwAF046JUO1x9iQ01r9NGrmWOMz5r4dt1cw_gSokkLhy0VVaFlOOqZusmrZixoCrJwQAvD_BwE
I suppose you could lift the row of slabs nearest the house until you find the vent(s), then fit the telescopic vent where needed.
I assume you have a suspended timber floor. Without crossflow air, it's the timbers that are at risk. There should be very little risk of damp in the walls.
Perhaps look to each side of the patio and drill some new vents into the house wall. simple, inexpensive job. The vents do'n necessarily need to be exactly in the right position as long as there are enough of them. Any decent builder will advise.