News2 mins ago
Hot Water
5 Answers
Hi, I have an issue with my bath tap where it gives warm water for a few seconds then cold water and alternates every few seconds. The sink and kitchen hot tap work perfectly fine. Not sure why has started doing this and only effecting the bath tap. Both the sink and bath taps are only a meter away from each other. Any ideas? Thanks
Answers
Best Answer
No best answer has yet been selected by NISAR1. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I had a look at the mixer and it came with the bath suite 10 years ago. I took apart the hot water tap and one oring was broken so I replaced it with a new one but no luck. Then I tried to take apart the cold tap but the brass fitting where the screws goes in snapped off so will have to get a new one. Shall I go for the ceramics or normal see link below of the ones I currently have. Thanks
https:/ /www.sc rewfix. com/p/f lomasta -thread ed-tap- glands- 24mm-x- 2-pack/ 7960f
https:/