Quizzes & Puzzles6 mins ago
Painting Around Firesurround After Woodburner Installed
8 Answers
Had firesurround removed, old hearth removed, woodburner installed, new hearth installed, firesurround replaced. New hearth is about an inch less high then previous one so there's a gap between mantlepiece and existing painted wall of about an inch that has been plastered over. When firesurround was removed some plaster came off the wall in a place adjacent to the left pillar and that piece was about four inches wide. Now been replastered .
If I had the original paint I could paint the replastered bits but of course I don't and while it is a magnolia colour any tin I buy won't be an exact match.
Two possibilities -paint a border in a different colour about 4 inches wide all the way round or repaint entire wall with a close match.
If the former. I've got some paint that is slighly darker but could be seen clearly as a border but would it be better to use white?
If the latter the other three walls will be a different colour even if only slightly different . Would that look weird?
Thanks
If I had the original paint I could paint the replastered bits but of course I don't and while it is a magnolia colour any tin I buy won't be an exact match.
Two possibilities -paint a border in a different colour about 4 inches wide all the way round or repaint entire wall with a close match.
If the former. I've got some paint that is slighly darker but could be seen clearly as a border but would it be better to use white?
If the latter the other three walls will be a different colour even if only slightly different . Would that look weird?
Thanks
Answers
Best Answer
No best answer has yet been selected by barnaclebill58. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Although a 4" border would look fine, I think You'd have a hard job cutting a neat line between the different colours. It could easily look scrappy.
I would get the roller out and paint the whole wall. It's only my personal opinion but a shade that was deliberately different from the other three walls would look better than one that was only close to the other shade.
Also... you might consider a retro look with a 4" (or similar) tiled surround. It would take a lot of thinking about, and would rather depend on the look of the whole room.
I would get the roller out and paint the whole wall. It's only my personal opinion but a shade that was deliberately different from the other three walls would look better than one that was only close to the other shade.
Also... you might consider a retro look with a 4" (or similar) tiled surround. It would take a lot of thinking about, and would rather depend on the look of the whole room.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.