Donate SIGN UP
Home > Motoring > vectra brake caliper piston

vectra brake caliper piston

Avatar Image
LOADERDAI | 17:22 Sat 17th Feb 2007 | Motoring
3 Answers
just tried to change rear brake pads on my 53 plate vectra and i could not get the piston to go back in.
i undid the bleed nipple and nothing is there a special when
prev Orig B2 Safety Device.
  
next Bodywork Protection.
Gravatar

Answers

1 to 3 of 3rss feed

Best Answer

No best answer has yet been selected by LOADERDAI. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image tigga
Take the cap off your brake fluid reservoir, (do not remove any bleed nipples) the piston should just push back in, it will be difficult given the pressure in the system (put the old pads in the caliper and put something between them to lever them apart)
22:02 Sat 17th Feb 2007
Avatar Image Big Bri
make sure they don't wind back before trying to push them if the handbrake is on the caliper thy wind
15:46 Sun 18th Feb 2007
Avatar Image chevrolet1.8
just use a large screwdriver or something flat, lever it back in by pushing against the piston and the other side of the caliper. works for me everytime.
08:35 Mon 19th Feb 2007

1 to 3 of 3rss feed

Do you know the answer?

vectra brake caliper piston

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.