ChatterBank0 min ago
How to uninstall Personal System/2 mouse and install a USB optical mouse.
5 Answers
Everytime I go onto the control panel of my computer (operating system Windows XP) and go to the mouse icon then to the device driver to uninstall my mouse, it always says it's uninstalling but when it restarts again it is still installed and the optical USB mouse doesn't get recognised. I just don't know what to do! Any advice??
Answers
1 to 5 of 5
Best Answer
No best answer has yet been selected by XxHeatherxX. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
what order exactly are(have) you done things in
the usual method for almost all USB devices is to install the drivers before you insert the device for the first time.
In the case of a mouse ... its slightly different as the device is taken for granted.
You don't say what system you have .... systems older than 12 months may not natively support USB devices and require the windows drivers.
The first USB keyboards caused problems because you couldn't config the BIOS without a ps2 connection - this sounds similar.
Try
1 Installing the new usb drivers ....
2 add/remove progs - uninstall your existing PS2(?) mouse software (if any)
3 remove the entry for the mouse from Device Manager
4 Remove the actual PS2 mouse
5 Insert your USB mouse
6 Action | Scan for hardware changes
Shouldn't need a re-boot .... but reboot anyhow just to see.
Most reasonably new motherboards allow for PS2 ports to be hot swapped (older ones require a reboot) - so if it still refuses to see your new mouse swap back.
and try the add remove new hardware wizard
If that fails .... it's time to poke around in the BIOS .. shout
the usual method for almost all USB devices is to install the drivers before you insert the device for the first time.
In the case of a mouse ... its slightly different as the device is taken for granted.
You don't say what system you have .... systems older than 12 months may not natively support USB devices and require the windows drivers.
The first USB keyboards caused problems because you couldn't config the BIOS without a ps2 connection - this sounds similar.
Try
1 Installing the new usb drivers ....
2 add/remove progs - uninstall your existing PS2(?) mouse software (if any)
3 remove the entry for the mouse from Device Manager
4 Remove the actual PS2 mouse
5 Insert your USB mouse
6 Action | Scan for hardware changes
Shouldn't need a re-boot .... but reboot anyhow just to see.
Most reasonably new motherboards allow for PS2 ports to be hot swapped (older ones require a reboot) - so if it still refuses to see your new mouse swap back.
and try the add remove new hardware wizard
If that fails .... it's time to poke around in the BIOS .. shout
-- answer removed --
Bios = basic in out system
its on a chip on your motherboard ....
lots of settings .... some simple ... some very technical
it tells you PC that it's a PC and not a washing machine
such things as hard disc size, ammount of memory
boot order (floppy, cd/dvd, and harddrive)
basically ... if you wand to know ... read about it ... don't experiment with it ... or you could end up with a doorstop
its on a chip on your motherboard ....
lots of settings .... some simple ... some very technical
it tells you PC that it's a PC and not a washing machine
such things as hard disc size, ammount of memory
boot order (floppy, cd/dvd, and harddrive)
basically ... if you wand to know ... read about it ... don't experiment with it ... or you could end up with a doorstop
1 to 5 of 5
Latest Posts
News0 min ago
Shopping & Style2 mins ago
Crosswords3 mins ago
Quizzes & Puzzles10 mins ago
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.