Donate SIGN UP

electric shock

Avatar Image
jimmonas | 16:58 Tue 27th Mar 2007 | How it Works
7 Answers
is it true that its not the volts that kill you in electrity but the amps..if so how many amps does it take ??
Gravatar

Answers

1 to 7 of 7rss feed

Best Answer

No best answer has yet been selected by jimmonas. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Depends if you have dry hands and wearing rubber boots, or if you are standing in a bucket of water with wet hands.

http://en.wikipedia.org/wiki/Electric_shock
As vhfg says, bit of a depends question, but on the whole correct. For example, the High Tension leads on a car engine (which work the spark plugs) run at about 12,000 Volts (can't remember the amperage). You can get an uncomfortable belt off them, but it won't kill you, whereas a domestic cooker runs at 240Volts , but around 30 amps and that could conceivably kill you.
30mV is lethal
30mA sorry!
-- answer removed --
If you imagine a hose pipe then the volts are the pressure and the amps are the amount of water Ie the thickness of the pipe. So it's a combination of the 2, ie you need enough pressure but you also need enough water.
Only a tiny current to kill you through 'ventricular fibrillation'. Here, heart muscles are affected by the current and move independently of each other. This means the heart no longer acts as a pump. A tenth of an amp (100 mA) can do this. Under certain conditions, and according to the sensitivity of the victim, it could be as low as Priceyclause's 30 mA.

1 to 7 of 7rss feed

Do you know the answer?

electric shock

Answer Question >>