Donate SIGN UP

kitchen tap won't stop running?!

Avatar Image
Agnes Miller | 11:40 Wed 23rd May 2007 | How it Works
4 Answers
I have a mixer tap. Was using hot tap only and when I turned it off, the water kept going. Is it as simple as changing the washer or do I have to change the whole expensive tap unit? Plumbing advice gratefully received. Thanks.
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by Agnes Miller. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
You just need to replace the washer!!
The rubber washer has probably cracked. The solution is to turn off the water at the mains, carefully remove the tap using a screwdriver and a spanner and replace the washer. Hold firmly on to the tap as you loosen the nut, do not allow it to rotate.
Teddio How do you know that Agnes has a combination boiler ? hot water cylinder systems need the cold water from loft storage tank feed valve to the cylinder usually in the airing cupboard turning off usually a gate valve and usually seized up so WD spray and TLC should do the trick that's if you have that system then you can deal with the hot tap hth Tez
If you have a ceramic disc tap you might like to look at this link.
http://www.diydoctor.org.uk/projects/ceramic_d isc_taps.htm

1 to 4 of 4rss feed

Do you know the answer?

kitchen tap won't stop running?!

Answer Question >>