News0 min ago
Do I need Planning Permission or Building Regs for Workshop
3 Answers
Hi
I have at the moment a sunken (7ft below ground level) swimming pool, it is block wall type and im in the middle of converting this into an external (Workshop or Barbicue) the dimension are the same nothing changes I just have not decided what to finish this project as, at the moment, The size is 7ft below ground level 14ft length width is 12ft, All I intend to do is to cut through one of the walls at the end and build a door frame into it of which height will be 6.2 ft and the then build a box type framework all around the edge of the blockwork, after that I was going to fit up rafters and build a roof on the top, But I have come to a halt As Im worried Do I need planning permision for this type of work,
Floor space estimated at 15 quare metres
Cubic Volume is estimated at 39.65
It will be fitted with Electrical plug sockets
Barbicue is to be built in the centre of floor area and a fumes collector to be built into roof. or If I go for workshop it will be all as above but without the collector being built into room. #
Again my Concern is do I need planning permission to convert this old pool to a workshop/barbicue,
3.3 metres from rear of house
7ft below dpc level
blockwork was built for a pool so its strong enough.
any help would be appreciated
I have at the moment a sunken (7ft below ground level) swimming pool, it is block wall type and im in the middle of converting this into an external (Workshop or Barbicue) the dimension are the same nothing changes I just have not decided what to finish this project as, at the moment, The size is 7ft below ground level 14ft length width is 12ft, All I intend to do is to cut through one of the walls at the end and build a door frame into it of which height will be 6.2 ft and the then build a box type framework all around the edge of the blockwork, after that I was going to fit up rafters and build a roof on the top, But I have come to a halt As Im worried Do I need planning permision for this type of work,
Floor space estimated at 15 quare metres
Cubic Volume is estimated at 39.65
It will be fitted with Electrical plug sockets
Barbicue is to be built in the centre of floor area and a fumes collector to be built into roof. or If I go for workshop it will be all as above but without the collector being built into room. #
Again my Concern is do I need planning permission to convert this old pool to a workshop/barbicue,
3.3 metres from rear of house
7ft below dpc level
blockwork was built for a pool so its strong enough.
any help would be appreciated
Answers
1 to 3 of 3
Best Answer
No best answer has yet been selected by killer shark. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
take a read of this
http://www.planningportal.gov.uk/england/genpu b/en/1106655490418.html
I think you need to have a chat with the local planning office as it could get involved and costly if you breach planning laws
http://www.planningportal.gov.uk/england/genpu b/en/1106655490418.html
I think you need to have a chat with the local planning office as it could get involved and costly if you breach planning laws
Hi all thanks for the response keep it coming all info is valuable.
As for the first response when I had pool built I did not need Planning permission as there was no roof above pool But Im not sure as to what would happen if I fit a roof on now, Im currently looking at the councils porthole thingy for what is required.
2nd response Ask me to visit the porthole thingy
Again I have checked this and it states
Floor space upto 15sq Metres is exempt from planning permission
Additionally with apex roof no higher than 4 metres is exempt
Or am I interpreting this incorrectly
I have decided on a Workshop
Again this seems exempt due to the amount of consumption or limited times it will be used or consuming power, Or agin Am I reading this wrong
Any help would be appreciated.
As for the first response when I had pool built I did not need Planning permission as there was no roof above pool But Im not sure as to what would happen if I fit a roof on now, Im currently looking at the councils porthole thingy for what is required.
2nd response Ask me to visit the porthole thingy
Again I have checked this and it states
Floor space upto 15sq Metres is exempt from planning permission
Additionally with apex roof no higher than 4 metres is exempt
Or am I interpreting this incorrectly
I have decided on a Workshop
Again this seems exempt due to the amount of consumption or limited times it will be used or consuming power, Or agin Am I reading this wrong
Any help would be appreciated.
1 to 3 of 3
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.