Calibra Turbopower steering

allan.g0ias | 17:15 Sat 02nd Oct 2004 | How it Works

2 Answers

I need to change the power steering fluid in my Calibra Turbo, sooner than top it up. how do I do it please? Regards Allan

cordless drill problem

Feeding USb1 into USB2

Answers

1 to 2 of 2

Best Answer

No best answer has yet been selected by allan.g0ias. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

BillyNoMates

The only way I know of - and it's not pleasant as it's very messy (ideally have an assistant) ; Remove the lower hose from the fluid reservoir. Put that into a container (with narrow neck, such as an old 5 litre oil bottle or water bottle). Start the engine and turn steering full lock to lock and back. Switch off immediately. Reconnect hose, refill reservoir, start engine and turn lock to lock again to bleed out any air. Switch off, top up to the correct level and repeat until you have a stable fluid level. Can help with noisy steering and a few other problems - you'll be surprised how much crap comes out with the old fluid.

allan.g0ias

Question Author

Thanks Billy... I can feel the crap in there...hence wanting to drain it...Regards Allan

1 to 2 of 2

Do you know the answer?