Triton shower s80

EVERTON56 | 14:23 Tue 30th Oct 2007 | How it Works

3 Answers

I have a low pressure light glowing on my shower. I have checked with utilities company and they haven't had any other complaints. I have also increased the flow of water coming into my house. So apart from getting a proffesional out i'm running out of options! Can anyone help have they had same problem with model?

mos 28/10 11a

laptop problems

Answers

1 to 3 of 3

Best Answer

No best answer has yet been selected by EVERTON56. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

Dave G

Hi
Turn off the supply and disconnect the water feed in to the shower.

There should be a filter in the inlet valve and if that has even a little residue from possibly work in the road Etc. it will reduce the flow .

remember to turn off the electricity first.
good Luck
Dave G

bigsister

Hope this isn't too late, but all you may need to do is to descale the shower head. Works for me!

oldrenders

this may be obvious but is the shower connected to a cold water mains pressure supply? This is what they are intended for. If it is connected to a stored cold water tank such as commonly feed bathroom cold taps, then the shower pressure will be governed by the height of the tank above the shower head, and the utilities supply pressure has no effect.

1 to 3 of 3

Do you know the answer?