Quizzes & Puzzles2 mins ago
Answers
Best Answer
No best answer has yet been selected by bazzard. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.If you mean the hose that feeds the washer from a spigot then nearly all of those types of hoses are standard (at least here in the U.S.) and the usual garden hose will work. It may be that, for some reason, the seller removed the fitting from the pump. You should be able to buy the fitting cheaply at any DIY store or one that specializes inthis brand.
If you mean the hihh pressure hose to run from the pump output to the wand,then the same advice applies.
Best of luck!
If you mean the hihh pressure hose to run from the pump output to the wand,then the same advice applies.
Best of luck!
If you mean the 'water supply' hose, you don't get one, but there should be a Hozelock snap fitting on the side/top of it somewhere. You may need to buy an adaptor for the end of your hose. On this one you can see the green hose and yellow adaptor at bottom right.
http://www.fredshed.co.uk/photosdiytools/karch erpressurewasher.jpg
If you mean the hose to the lance, this is special and will need to come from the manufacturer/shop.
http://www.fredshed.co.uk/photosdiytools/karch erpressurewasher.jpg
If you mean the hose to the lance, this is special and will need to come from the manufacturer/shop.