News7 mins ago
Installing a timber floor
Hi all,
The end room in by bungalow 14' x 12' has a quarry tiled floor. It used to be the garage, but was converted into a bedroom many years ago.
I would like to raise the floor 8" to bring it up to the level of the other floors in the building.
First and foremost do I need permission, is there any regulations that I have to comply with, and most important of all "How do I do it"
My thoughts were to lay 1" insullation on the existing floor, and use 6" x 2" joists infilled with insulation with chipboard flooring on top.
I would be grateful if someone would tell me the correct way.
Thanking you in anticipation.
Regards
CSG2306
The end room in by bungalow 14' x 12' has a quarry tiled floor. It used to be the garage, but was converted into a bedroom many years ago.
I would like to raise the floor 8" to bring it up to the level of the other floors in the building.
First and foremost do I need permission, is there any regulations that I have to comply with, and most important of all "How do I do it"
My thoughts were to lay 1" insullation on the existing floor, and use 6" x 2" joists infilled with insulation with chipboard flooring on top.
I would be grateful if someone would tell me the correct way.
Thanking you in anticipation.
Regards
CSG2306
Answers
Best Answer
No best answer has yet been selected by CSG2306. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.How about a "floating" floor CSG................lay 7 inches (approx 180mm) of rigid foam board (insulation)........Celotex and Kingspan are the most common...................cover with polythene as a vapour check layer.......lay 18mm tongued and grooved chipboard over............T&G joints MUST be glued with PVA........terrific level of floor insulation.........certainly no planning permission needed........ :o)
Hi The Builder,
I spoke with the suppliers of the insulation board that you suggested, unfortunately they informed me that it would not be suitable for laying a "floating floor".
The reason they gave was that the floor would eventually compress under normal wear and tear and become uneven.
Thank you for your suggestion, I was prepared to give it a go as it sounded great but!!!!!!!
I will have to return to plan "A"
Regards
CSG 2306
I spoke with the suppliers of the insulation board that you suggested, unfortunately they informed me that it would not be suitable for laying a "floating floor".
The reason they gave was that the floor would eventually compress under normal wear and tear and become uneven.
Thank you for your suggestion, I was prepared to give it a go as it sounded great but!!!!!!!
I will have to return to plan "A"
Regards
CSG 2306
OK then CSG................sod 'em LOL
Everyone's covering their a$$es so much these days..................these boards are routinely laid UNDER concrete floors, and concrete screeds..................if they feel like that, then put a floating floor over good old (cheap) polystyrene boards..I've done that many times................with NO problems...............
Everyone's covering their a$$es so much these days..................these boards are routinely laid UNDER concrete floors, and concrete screeds..................if they feel like that, then put a floating floor over good old (cheap) polystyrene boards..I've done that many times................with NO problems...............
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.