Family & Relationships14 mins ago
how do u replace wiper linkage/motor on a vectra
2 Answers
hi, i believe my wiper motor has lost the park/home position as whenever i put it in the intermittent position in will only do about half to 3/4 of a stroke also if in full normal mode then turn it off it will stop whereever it wants. i was told its a common fault on them and to replace the motor and linkage as its easier to replace the whole thing rather than just the motor any one with a website that shows how to replace it would be very grateful also are all vectra wiper motor/linkage the same for all models for the vectra B model many thanks
Answers
Best Answer
No best answer has yet been selected by paultintin. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hi Paul, I replied to you last week, Start by taking the plastic covers over the Wiper arm nuts (They can be a sod to remove from the spline) Lift up your bonnet & look in the direction of the Bulk Head, where the wipe comes through the body there are 2 securing nuts, remove them,There is a plastic trim going from the N/S TO OFF/SIDE remove the screws+ clips that hold that in place hen you will see the 4 nuts/bolts holding it in place on metal plate, Unplug the Elec connector remove the nuts & remove the motor+ linkage, the linkage are kept together by plastic snap cup Ball ( You will see what I mean) the job will take you about a couple of hrs if that, when you replace the trim& motor etc, try the wipers out. if all OK, replace the trim, ( I did not remove the battery lead) Look on EBAY or 247 Motor spares for your motor, But for your Bank account sake do not go to the dealers.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.