Donate SIGN UP

rover 200

Avatar Image
dunny27 | 15:55 Wed 22nd Jul 2009 | Motoring
8 Answers
when does the head gasket need doing on a rover 200 thats done 36000
Gravatar

Answers

1 to 8 of 8rss feed

Best Answer

No best answer has yet been selected by dunny27. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
When it fails and needs replacing.

Head gaskets are not a service item, you don't change them unless they need changing.
Rover 200,s come pretty close to a service item though ChuckFickens........very common problem .
chas2008 is correct the k series engine is rubbish, major design fault causes the head gasket to fail at will.
yeah I do agree that the K series is not the best when it comes to head gaskets, though the actually didn't mention that it was a k series engine at all, it could be a M series, a T series,a S series or even a honda engine in a 200 (though at 36K a k series is most likely)
if it aint broke dont fix it , if its running ok leave it alone
there is no set time for them to go, I had a 200 k series, the head went at 40000, I have had a montego in the past the head went at 68000. I had a rover 820 and the head did not go at all!

just deal with it if or when it happens
The best thing to do is make sure that the cooling fan on the radiator comes on when the engine starts to get hotter i.e. when stuck in a traffic jam.

A common failure is the heat sensor switch that turns this fan on, it's usually attached to the radiator somewhere by a screw on nut and is a cylindrical object with two wires coming out of it.

A way to test this is working is run the engine with it unscrewed from the radiator.
Dip the end of the 'switch' in a jug of boiling water, if the fan comes on the switch is ok, if not get it changed.
my wife had a 200 ..honda engine...the head gasket blew at 45000..but because the honda engine is all alloy then it was not just the head that warped but the block as well..so was totally uneconomical to repair
most rovers and especially freelanders are famous for head gaskets going

1 to 8 of 8rss feed

Do you know the answer?

rover 200

Answer Question >>