Dynamode BR-6004 W-G1 router

missspeedy23 | 18:29 Tue 03rd Jun 2008 | Technology

5 Answers

Does anyone know how to set up the router with security settings please? It's currently running as an unsecured network which I'm not too keen on.

Cheers
Jo

PC won't reboot after adding memory

Too complicated for me to even set the question - help!

Answers

1 to 5 of 5

Best Answer

No best answer has yet been selected by missspeedy23. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

ChuckFickens

best to do this while connected using a ethernet cable and i believe the default password/username for your router is:

username:guest
Password:guest

open internet explorer and log in to the router via http://192.168.1.1 enter name and password. Click the WAN set up tab at the side and check that you have used Dynamic IP User when you set it up. if not, change it to Dynamic IP and the click the save box at the top. Click Wireless tab and make sure the Disabled Wireless box is NOT checked, Type a name in the SSID box(this will be the name you see when you search for wireless networks from your laptop) and in the Broadcast SSID box check Enabled, click save. Click the security tab at the top and in the Authentication Type drop down box choose WPA then in the KEY box make up a password of between 8 and 63 characters, click save. Then click the MISC tab scroll down and click the restart system tab.

disconnect the ethernet lead and on your laptop make sure your wireless network connection is switched on in the laptop you should then get a wireless networks available box, view networks, click the one you have just named and enter the password you should now be connected open Internet Explorer you should now be online, when you next start your laptop it should automaticaly connect to your network.

missspeedy23

Question Author

Thanks for this but on the security section there is only the option of WEP not WPA. Any ideas?

ChuckFickens

is there really, you'll have to use WEP then... it's not as secure as WPA but if that the only option then you'll have to go for that, it's better than nothing.

WEP will probably have a key/password set already so just make a note of that and enter that on the laptop when asked for the network key

missspeedy23

Question Author

Sussed it now thank you very much. There wasn't a key in so I've had to put on in but got it working now, thanks a lot.x