News4 mins ago
Washing Machines
Answers
No best answer has yet been selected by Goody2shoes. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.If that makes NO sense whatsoever then try putting your machine on a hot wash with nothing in the machine and don't add detergent/fabric conditioner. Apparently it does the machine the world of good to occasionally have a hot wash with nothing in it.
Good luck!
I've been having the same problem with my Hotpoint for months. An engineer came out to check it, but the softener dispenser pipe was clear. I've wasted so much conditioner trying to pour it in with water at the end, etc., but have now given up!
I've never heard of those conditioner pearls shehin, but will buy some today - they have to be worth a try!
I've had a similar problem with Hotpoint WMA60. Also the dispenser drawer seems to get a lot of black 'mould'. Remove the drawer, and check the top of the dispenser body, there are a load of holes for the water to enter the dispenser, but only one of these holes is for the conditioner! If this is blocked/or partly blocked not enough water goes in the conditioner compartment to allow the siphoning to work (Crap design)! Have dismantled dispenser body, cleaned with bleach, same problem in less than three weeks. Looks like �25 on a new dispenser body, or �400 on a Bosch machine!