Donate SIGN UP

Damaged Asbestos

Avatar Image
numnum | 12:53 Sun 19th Sep 2010 | DIY
5 Answers
My partner and I are doing up an old house. One wall is asbestos and was damaged when removing rotten beams

Its just a slight crackmaybe a foot long and an inch wide

I know that from reading about asbestos that it is fine as long as its not disturbed but is it a problem now its been slightly damaged?

Kingspan then plasterboard will then be going on top of it one the beams are all replaced.
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by numnum. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
If you are sure that it will not be disturbed again, it may be safer to leave it in-situ. Will there be a need to drill into it for general construction or electrical work? If not then I would leave it.
I am starting an asbestos removal company in the new year and I know quite a bit about it. I would personally leave it unless you want a firm to come and get rid which will cost a lot.
Question Author
theres nothing needing to be done to it. new wooden beams are going up but not disturbing it and all electrical work wont be near it

we have some damp proofing rubber type stuff. we were thinkin to glue it over the cracked area or just to leave the crack open and the kingspan and plasterboard will be enough to cover it?
numnum the glue sounds like an awefully good idea.
Definitely Num .............. board right over it ........... probably the best place for it.
It won't be "blue" asbestos anyway :o)

1 to 5 of 5rss feed

Do you know the answer?

Damaged Asbestos

Answer Question >>

Related Questions