Quizzes & Puzzles18 mins ago
voltage reduction
6 Answers
CAN I REMOVE A AMERICAN STYLE PLUG(IT IS AMERICAN LIGHTS) AND PUT A ENGLISH STYLE ONE ON A SET OF CHRISTMAS TREE LIGHTS?
Answers
Best Answer
No best answer has yet been selected by obofwells. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.The previous response is quite correct, that if indeed the lights are rated at 110V which is the norm in the USA then you would need a transformer to reduce 240V down to 110V. One of these would probably set you back around �20 max, however you will need to find out first the exact rating of the bulbs in total so that the transformer can cope with the loading. My guess is it'd be cheaper to just buy english, unless they are very expensive lights.
as a person who travels to the USA and purchases dozens od stings of outside Xmas lights, this is the way I wire in 110 volt lights. I purchase a 240/110 volt 5 kw double plug transformer from a local electrical. I have now two. I have purchased from the USA four good quality extension leads with four american sockets on each lead. I cut off the one end so removing the single american two pin plug. I wire this end into a junction box and then wire into the transformer. American Xmas lights are designed so you can string three sets of lights end to end. Make sure the connections and junction box is kept dry and away from young children. This has worked well for over ten years and the lights are better than anything you buy in the UK.