Quizzes & Puzzles16 mins ago
power use
15 Answers
how much is my comp using, i know it probably like asking how long is a piece of string,
i have 500watt power supply, 2 hard drives, pentium 4 cpu,3 gb memory
i know what the monitor uses.
for some reason this comp will NOT go into stand by ,if i put in hibernation it will not wake up.not bothered about that as i can set the power settings to shut hard drives off and monitor within 3 mins so i suppose that's the same as stand by ??
just seeing if i can cut down power energy bill it normally on for 18 hrs a day,
any info welcome
i have 500watt power supply, 2 hard drives, pentium 4 cpu,3 gb memory
i know what the monitor uses.
for some reason this comp will NOT go into stand by ,if i put in hibernation it will not wake up.not bothered about that as i can set the power settings to shut hard drives off and monitor within 3 mins so i suppose that's the same as stand by ??
just seeing if i can cut down power energy bill it normally on for 18 hrs a day,
any info welcome
Answers
Best Answer
No best answer has yet been selected by alan-r. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I haven't read the following link but it might help you work it out:
http://michaelbluejay...ricity/computers.html
http://michaelbluejay...ricity/computers.html
You say you have a 500watt power supply. Are you saying that that is what your computer is rated at consumption wise.?. Sounds rather high to me. Nevertheless, irrespective of your computers components, any electrical item which is rated at 500 watts would use one unit of electricity in 2Hrs.( a 100watt lamp would require 1 unit for ten hours usage.)
Ron.
Ron.
the power unit in the comp is a 500w supply G7 ATX PSU.
when i go to standby in my comp (xp pro and its staying xp till 2014 thanks)it looks like its gone into standby, the fans are still on but when i move the mouse to come out of standby the comp restarts fully, doesn't bother me as it's done this for years, as i say i have a setting in power options to turn off monitor and hard disk within 3 mins
when i go to standby in my comp (xp pro and its staying xp till 2014 thanks)it looks like its gone into standby, the fans are still on but when i move the mouse to come out of standby the comp restarts fully, doesn't bother me as it's done this for years, as i say i have a setting in power options to turn off monitor and hard disk within 3 mins
Technically..... yes, Ron. as with any electrical equipment most wear is caused by power cycles.
in the case of hard drives, you have to make a decision based on use. spinning them down every 3 minutes is excessive by any standards! I'd say 20-30 min is more acceptable on a desktop/laptop.
For the "proper" stuff with hard drives in (servers and any hard drive array) any power saving along those lines is not advisable.
in the case of hard drives, you have to make a decision based on use. spinning them down every 3 minutes is excessive by any standards! I'd say 20-30 min is more acceptable on a desktop/laptop.
For the "proper" stuff with hard drives in (servers and any hard drive array) any power saving along those lines is not advisable.
How long is a piece of string?
For most individual items in a computer you can find a MTBF value. (Mean Time Between Failure).
but as in any value, it's only an indication, for example, a western digital hard drive might quote a MTBF of 1.4 million hours.... but that's a pretty meaningless value TBH, the drive (or any other part of your computer) will last as long as it lasts and that may only be one hour!
You're safer thinking "it will fail" and preparing for that.
For most individual items in a computer you can find a MTBF value. (Mean Time Between Failure).
but as in any value, it's only an indication, for example, a western digital hard drive might quote a MTBF of 1.4 million hours.... but that's a pretty meaningless value TBH, the drive (or any other part of your computer) will last as long as it lasts and that may only be one hour!
You're safer thinking "it will fail" and preparing for that.
Looking outside the obvious answer of the initial question in that any piece of string is twice as long as half it's length; why not buy a power consumption meter? You plug it into the socket and then plug your PC's mains cable into it and it will give you an LCD readout of the consumption in watts.
Of course, have a power supply rated at 500W means simply that; it is rated to supply a maximum of 500W under full load. That in no way at all means that it will consume that amount of electricity during day to day operation. As snags link points out in a table, the energy consumption of a PC will depend on both it's components and also it's usage patterns. Surfing the net and typing a word document will, for example, use significantly less energy than playing a modern PC game or encoding video. So really, there is no way to say exactly aside from testing it yourself and recording power draw when doing the things you do with it. Even then, the best you'll be able to work out is a semi educated guess.
Of course, have a power supply rated at 500W means simply that; it is rated to supply a maximum of 500W under full load. That in no way at all means that it will consume that amount of electricity during day to day operation. As snags link points out in a table, the energy consumption of a PC will depend on both it's components and also it's usage patterns. Surfing the net and typing a word document will, for example, use significantly less energy than playing a modern PC game or encoding video. So really, there is no way to say exactly aside from testing it yourself and recording power draw when doing the things you do with it. Even then, the best you'll be able to work out is a semi educated guess.