Size of Spanners/Sockets

davewr | 12:27 Mon 12th Mar 2012 | Cars

6 Answers

Can anyone tell me the size of the spanners for the bolt-head and nut of the rear shock absorber lower mounting bolt on a Fiesta, 1250cc, 05 reg? I've tried various sizes but can't get a good fit. I think they could be 15mm & 18mm, but I'd like to know before I buy them.

When does the thermostat open

door mirror renault scenic..

Answers

1 to 6 of 6

Best Answer

No best answer has yet been selected by davewr. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

TWR

Try your wheel brace on the Nut Dave.

davewr

Question Author

I thought that could be a winner but I tried it last night and it's 19mm. I hope to borrow a 15mm & 18mm at the week-end to try them (I want to do the job over Easter), and if they are not right then it must be 5/16 & 3/8 Whitworth. I got rid of all my Whitworth spanners about 30 years ago as I thought I'd never need them again.
Thanks for your suggestion anyway.

johnk

Do you have a vernier or micrometer to measure across the flats?

malagabob

Might be a bodgers last resort way but can you get an adjustable spanner on the nut/bolt
and maybe a molegrips/stillsons

TWR

With respect to Malagabob's answer, I would not use either of these tools, you can end up with a bigger job if you rounded the Nut Dave. Sorry Bob.

davewr

Question Author

They are 15 & 18mm - I borrowed a couple to try. I had used a vernier to measure across the flats but wasn't sure of the exact range, metric, A/F or Whitworth. I'm pretty handy with a hammer & chisel on stuborn nuts but it's difficult to torque them back up that way!
Thanks for your help.

1 to 6 of 6

Do you know the answer?