Religion & Spirituality0 min ago
setting up a belkin G+ MIMO router
12 Answers
Evening. Attempting to set up a wireless network for a friend.
Model no. F5D923
Belkin G+ mini router.
I have plugged the box into the pc and am picking up the wireless signal etc normally.
The problem is that I don't know the password. There's nothing on the box or the router (nor is there a handy card with the details on etc). What is the best way of working out the password, or resetting/changing it?
Tia.
Model no. F5D923
Belkin G+ mini router.
I have plugged the box into the pc and am picking up the wireless signal etc normally.
The problem is that I don't know the password. There's nothing on the box or the router (nor is there a handy card with the details on etc). What is the best way of working out the password, or resetting/changing it?
Tia.
Answers
If your router is not new as has had a previous user then only way would be to reset the router. There should be a small hole with a pin hole button on the back that you push with a paper clip when the router has power. Press and hold for 5 seconds and release.
21:14 Mon 23rd Apr 2012
"If your router is not new as has had a previous user then only way would be to reset the router."
I was the previous owner. Sadly I couldn't remember the password.
I've yet to get the whole thing working, here's what has happened:
1. Reset router
2. Login to the admin page
3. Attempt to add security/password
4. Page crashes after submission
5. Can't log on with new selected password or into the admin page again.
I was trying to do it with my phone yesterday. It was fine for the first part, but once the page crashes there was nothing to be done!
I also couldn't get the PC which was plugged into the router to visit the admin page; how do I set up Windows 7 PC to connect to the network so I can do this? The network/connections manager is something I've not had to deal with much on Windows 7 and it feels quite different to XP.
I'm going round this evening again to give it another go. It dawned on me after I left that I could have been using a laptop with a wireless card to sort the admin page stuff... which may have been more successful.
To be completely clear the goal of setting this up is to access music etc from the main PC on:
1. Laptop
2. Phone
3. PS3
4. iPad
Any advice relating to getting these set up would also be welcome.
I was the previous owner. Sadly I couldn't remember the password.
I've yet to get the whole thing working, here's what has happened:
1. Reset router
2. Login to the admin page
3. Attempt to add security/password
4. Page crashes after submission
5. Can't log on with new selected password or into the admin page again.
I was trying to do it with my phone yesterday. It was fine for the first part, but once the page crashes there was nothing to be done!
I also couldn't get the PC which was plugged into the router to visit the admin page; how do I set up Windows 7 PC to connect to the network so I can do this? The network/connections manager is something I've not had to deal with much on Windows 7 and it feels quite different to XP.
I'm going round this evening again to give it another go. It dawned on me after I left that I could have been using a laptop with a wireless card to sort the admin page stuff... which may have been more successful.
To be completely clear the goal of setting this up is to access music etc from the main PC on:
1. Laptop
2. Phone
3. PS3
4. iPad
Any advice relating to getting these set up would also be welcome.
"3. Attempt to add security/password
4. Page crashes after submission"
Try it in compatibility mode (if you're using IE)
"how do I set up Windows 7 PC to connect to the network"
It should just connect on a wired connection, there are two things I can think of that would stop this.
1) the computer has been set with a manually assigned IP address, to check this open a command prompt and type "ipconfig /all" and look under local area connection for DHCP enabled. if it says yes then the network adapter properties will need to be set to obtain everything automatically.
2) the antivirus software needs to be told the IP range that router assigns is a trusted range.
4. Page crashes after submission"
Try it in compatibility mode (if you're using IE)
"how do I set up Windows 7 PC to connect to the network"
It should just connect on a wired connection, there are two things I can think of that would stop this.
1) the computer has been set with a manually assigned IP address, to check this open a command prompt and type "ipconfig /all" and look under local area connection for DHCP enabled. if it says yes then the network adapter properties will need to be set to obtain everything automatically.
2) the antivirus software needs to be told the IP range that router assigns is a trusted range.
information (with pictures) here
http://www.wikihow.co...-a-Router-to-Use-DHCP
http://www.wikihow.co...-a-Router-to-Use-DHCP
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.