ChatterBank1 min ago
Getting rid of Stippling on Ceiling
22 Answers
I am trying to get my living/dining room decorated and every decorator I have seen does not want to get rid of stippling. They suggest I get a plasterer in to replaster the ceiling instead. I know that there is a steaming method which appears to take some time, is messy and expensive and also the scraping method. It seems that plastering may be cheaper. A few years ago, we had a kitchen put in and the stippling was removed from the ceiling and our ceiling looks great. No steam was used, and I believe that the ceiling was scraped down, but I am not 100% sure of this. In the living/dining room, the stippling pattern is quite pronouced and has two unsightly long veins running through the ceiling; it gives the impression that the ceiling is dividing into three sections.
Would I be better off dealing with a builder than a decorator? Also would there be any problems having the ceiling replastering over the original stripping?
Any advice and suggestions please? Thanks
Would I be better off dealing with a builder than a decorator? Also would there be any problems having the ceiling replastering over the original stripping?
Any advice and suggestions please? Thanks
Answers
1) Artex is the manufacturer 's brand name of a wall finishing product that enables the creation of various patterns. One of those is stippling, but one can also just as easily create swirls or circles. Artex is the most common ceiling finishing matewrial used to get this effect.
2) It is true that old artex (pre-1990 at least) had a small proportion of...
06:24 Fri 04th May 2012
This will probably just confuse the situation... (americans and English... similar peoples separated by a common language, no?) but here in the U.S. the finish on a lot of older ceilings was (and is) called 'popcorn finish'. It's a sprayed on finish that produced a not-unattractive mottled effect, especially when small, sparkly stuff is mixed in the application. However, as with all thing sold to consumers, it has gone out of style. If you watch programs like "House Hunters" negative comments are always given concerning the "popcorn ceilings". Looks like this since my word picture is a little weak: http://www.google.com...1t:429,r:15,s:0,i:106 ... (apologies for the URL).
Good thing is it's easily removed. A spray bottle ot typical garden sprayer (pump-up kind) filled with warm water, dish soap and liquid fabric softener applied liberally but not dripping, allowed to sit for 10 minutes or so and then simply scraped off with a 5 or 6 inch wide "putty knife). Makes a mess, but spreading the cheap plastic paint overspray protector material takes up most of the mess.
This type of finish was used extensively in the '50's thorugh the '80's, but now, smooth, painted ceilings are all the rage. After removal, a skim cat is reapplied to the ceiling to fill in the dips and uneven areas, finished with a coat of sealant and then painted as you wish. A few of the older ones did have some asbestos in the sprayed on particles, but the wet method of taking it down alleviates any concern...
Good thing is it's easily removed. A spray bottle ot typical garden sprayer (pump-up kind) filled with warm water, dish soap and liquid fabric softener applied liberally but not dripping, allowed to sit for 10 minutes or so and then simply scraped off with a 5 or 6 inch wide "putty knife). Makes a mess, but spreading the cheap plastic paint overspray protector material takes up most of the mess.
This type of finish was used extensively in the '50's thorugh the '80's, but now, smooth, painted ceilings are all the rage. After removal, a skim cat is reapplied to the ceiling to fill in the dips and uneven areas, finished with a coat of sealant and then painted as you wish. A few of the older ones did have some asbestos in the sprayed on particles, but the wet method of taking it down alleviates any concern...
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.