Quizzes & Puzzles0 min ago
Asbestos Roof
8 Answers
We have a corrugated asbestos garage roof which now leaks water to the inside....Is there any sort of bitumous coating that can be applied to the inside of the roof to seal it?
Thanks for any advice or suggestions...
Thanks for any advice or suggestions...
Answers
Best Answer
No best answer has yet been selected by Matheous-2. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.First off, do check to see if it's wind-driven rainwater that's running along the underside of the sheets.
If not, then a common thing is for the sheets to crack with age.
It's rarely a good idea to apply coatings on the inside. It's rather like dealing with the problem "after the event". Even if you can get a sealant to stick well, further water will eventually force it off.
If you do need a quick inside repair, just go for general purpose silicone sealant squirted from a frame-gun.
For outside, any of the "Ruberoid" mastic products smeared on with a simple wallpaper type scraper. One of these on this page (some are ok for external as well)...
http:// www.scr ewfix.c om/p/is oflex-l iquid-r ubber-2 -1l/360 10
If you want to further, you could even use the messy old "Turnerising" system the used to be applied to roofs to stop slates from slipping.
A coat of this first..............
http:// www.scr ewfix.c om/p/ce mentone -aquapr ufe-5lt r/36405 ?_reque stid=31 077
Then lay glassfibre netting over the whole (possibly a garden centre if it's still available ......)
Or this maybe ..............
http:// www.scr ewfix.c om/p/sc affold- netting /95543; jsessio nId=BMF nRFvPkf FnByn2T tnDS7lv MT11ZB1 yg1v3wz 9dHnPJF KLVl7KV !-90597 9492!13 5929438 3619#
Then a couple more coats of Aquaprufe.
The net is just for reinforcing. You may well think it unnecessary in your case.
If not, then a common thing is for the sheets to crack with age.
It's rarely a good idea to apply coatings on the inside. It's rather like dealing with the problem "after the event". Even if you can get a sealant to stick well, further water will eventually force it off.
If you do need a quick inside repair, just go for general purpose silicone sealant squirted from a frame-gun.
For outside, any of the "Ruberoid" mastic products smeared on with a simple wallpaper type scraper. One of these on this page (some are ok for external as well)...
http://
If you want to further, you could even use the messy old "Turnerising" system the used to be applied to roofs to stop slates from slipping.
A coat of this first..............
http://
Then lay glassfibre netting over the whole (possibly a garden centre if it's still available ......)
Or this maybe ..............
http://
Then a couple more coats of Aquaprufe.
The net is just for reinforcing. You may well think it unnecessary in your case.
Wasn't that long ago when my asbestos garage roof leaked. I go there so rarely I didn't notice until the beam was rotted sufficiently it needed to be replaced. I looked upon it as an opportunity to get rid of the hazardous material. Not saying it was in that bad a state but I didn't really feel comfortable having it around. I'd suspect it can't help when one comes to sell.
Not much in it Math. Onduline easiest to work with, and available at DIY sheds and Builders'Merchants. Can't say that anyone particularly likes the look of galvanised. Box profile would possibly have to be ordered from a stockist who would charge delivery. The Merchants wouldn't.
http:// www.ond uline.c o.uk/pr oducts/ ondulin e/
Say, £250 for the materials. A day's work for a decent handyman. That should also allow him time to take the old ones to the tip (probably a tipping charge here as well.)
Some builders might tend to make a meal of it. Local handyman would be fine. £100-150 for a day?
Extra for any timberwork.
Extra if he has to empty the garage.
That depends on what valuables you have in there. Removal involves kneeling on a scaffold board and pulling out the fixings with a nailbar. Some breakage of the sheets is inevitable. Bits WILL fall onto the contents.
These sheets are NON notifiable. No special training needed. They are only (officially) minmumly hazardous, with a little care.
http://
Say, £250 for the materials. A day's work for a decent handyman. That should also allow him time to take the old ones to the tip (probably a tipping charge here as well.)
Some builders might tend to make a meal of it. Local handyman would be fine. £100-150 for a day?
Extra for any timberwork.
Extra if he has to empty the garage.
That depends on what valuables you have in there. Removal involves kneeling on a scaffold board and pulling out the fixings with a nailbar. Some breakage of the sheets is inevitable. Bits WILL fall onto the contents.
These sheets are NON notifiable. No special training needed. They are only (officially) minmumly hazardous, with a little care.