Donate SIGN UP
Home > Motoring > Mot Question

Mot Question

Avatar Image
hammerman | 16:53 Mon 04th Feb 2013 | Motoring
7 Answers
Just a quickie. Got my MOT tomorrow, got 2 "nozzles" each side of the bonnet for washing the windscreen. Each "nozzle" has 2 jets. One of the jets on the drivers side is blocked. It still washes the windscreen perfectly with one nozzle.

MOT failure ?

Ta
prev Stop-Start Cars.
  
next Garage Floor
Gravatar

Answers

1 to 7 of 7rss feed

Best Answer

No best answer has yet been selected by hammerman. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Avatar Image SeaJayPea
Think so. If you've got a wire brush, shove one of the bristles up the nozzle. That may well clear it.
16:55 Mon 04th Feb 2013
Avatar Image tonyav
Not sure on that one hammerman, could you not unblock it with piece of fuse wire or something similar.
16:55 Mon 04th Feb 2013
Avatar Image Barmaid
Mine failed on that. Dress making needle soon sorted it.
16:55 Mon 04th Feb 2013
Avatar Image jake-the-peg
Fail Criteria: The windscreen washers do not provide enough liquid to clear the windscreen in conjunction with the wiper(s).

http://www.motester.co.uk/mot-guide

you tell us
16:57 Mon 04th Feb 2013
Avatar Image chrissa1
Ditto barmaid. A sewing needle will do the trick.
16:58 Mon 04th Feb 2013
Avatar Image Old_Geezer
Just ask them to fix minor issues, if they're up for it.
17:04 Mon 04th Feb 2013
Avatar Image TWR
If the jet are sending water out & onto the screen, it will pass, but why take the chance? as said, prod the holes with a pin but do not put too much force on the jet as you will knock them out of position.
19:23 Tue 05th Feb 2013

1 to 7 of 7rss feed

Do you know the answer?

Mot Question

Answer Question >>