Cloakroom Basin Search

[megfitz]

Hi, am refurbishing the cloakroom ,it's an odd size so I have quotes for a custom made cupboard but cannot find a small two hole drop in sink anywhere ,
My carpenter/plumber can only find one510 mm. long X420mm. wide and I'd really like a smaller one in White/Cream /ivory.not fussed about colour.
I've been to B&Q ,Homebase,Wickes,Plumb Centre . Can anyone suggest a supplier preferably in the North Hampshire area or online if they would deliver.
Thanks in advance.

[The Builder]

That's surprised me, Meg. I hadn't realised that they seem to have gone out of fashion.
I guess you mean "inset" basin... used to be called "vanity" basins.

I can find one or two with one taphole, but none with two. How about one with no holes? Simply fit the taps into the deck. Not the best solution with a timber top though. Water will stand around and rot the deck.

Also... "undermount" basin... usually with a granite or slate top. Large cut-out in the top, then the basin fitted underneath. Same rot problems with timber though if the taps are mounted in it.

What's your preferred size?

[The Builder]

Also ... think about "semi-recessed". The tap bit sits on the countertop, and the rest sticks out into the room?

[megfitz]

Would prefer not to have semi-recessed,and ideally would like the vanity basin to fit into the unit which is planned to be built in Mid Oak.
Size wise anything smaller would be fine,the problem is the cupboard won't be a regular shape being narrower at the back than the front (by about 8cm). Also I bought new Lever taps last year (after hand surgery) and want to reuse them.
Is it possible to order a custom made one ? or are there independent suppliers who could help.Wouldn't object to a reclaimed one if in good condition.
Any advice gratefully received

[The Builder]

Ok. I think we're trying to square too many circles here Meg. If you know what I mean. Needs a bit of lateral thinking.

Having a manufacturer tool-up especially for a one-off would be horrendously expensive.

Have a look at this for example...........

http://www.qssupplies.co.uk/bathroom-furniture-shower-taps/72388.htm

465 x 335mm.

I doubt if you'll ever find an inset that's not only small enough, but has 2 tapholes. One with no holes may be the answer.

An oak top rules out completely having taps mounted on it. Eventually, the oak would stain terribly, unless you're very lucky.

The inset in my link would look great with a single spout horizontally projecting from the wall behind. A simple lever operated valve could be mounted next to it (built-in of course - just some excavation in the wall behind.)

I know you've already bought the taps, but don't let that rule you. Most single, even mixer taps can be converted to levers.

[megfitz]

Thanks for all your help. I'm going to have a think then talk to my carpenter re options.