ChatterBank1 min ago
Cat Flaps
12 Answers
I'm looking into getting one. It has to be either magnet or microchip operated. Just wondered if anyone have experiences of either and how reliable they are.
Answers
Yes, you just program the cat flap to recognise the cat's existing microchip. These instructions are from the Cat Mate flap, but I imagine they are all similar: 3. Programming Program your cat’s microchip or I.D. Disc(s) as follows: 3.1 Press and hold the 'PROGRAM' button (H, Fig. 1) for 5 seconds until the LED (A) illuminates. Wait a minimum of 10 seconds....
17:43 Sat 14th Mar 2015
Great - thanks. I was leaning towards the microchip idea (especially as the cat has never worn a collar) The cat has an interesting history and at one point lived with my neighbour who microchipped her at the PDSA (neighbour long dead so details obsolete). I'm just hoping that it's possible to put another chip in -I'll have to ask the vet.
Yes, you just program the cat flap to recognise the cat's existing microchip.
These instructions are from the Cat Mate flap, but I imagine they are all similar:
3. Programming
Program your cat’s microchip or I.D. Disc(s) as follows:
3.1 Press and hold the 'PROGRAM' button (H, Fig. 1) for 5 seconds until
the LED (A) illuminates. Wait a minimum of 10 seconds.
3.2 Encourage your cat to slowly pass through the tunnel by
holding the flap open as shown in Fig. 5 after checking the rotary 4 way
lock (E) is set to 'IN & OUT'.
3.3 When programmed, the LED will flash.
3.4 Press the 'PROGRAM' button to save the setting
These instructions are from the Cat Mate flap, but I imagine they are all similar:
3. Programming
Program your cat’s microchip or I.D. Disc(s) as follows:
3.1 Press and hold the 'PROGRAM' button (H, Fig. 1) for 5 seconds until
the LED (A) illuminates. Wait a minimum of 10 seconds.
3.2 Encourage your cat to slowly pass through the tunnel by
holding the flap open as shown in Fig. 5 after checking the rotary 4 way
lock (E) is set to 'IN & OUT'.
3.3 When programmed, the LED will flash.
3.4 Press the 'PROGRAM' button to save the setting
We have had a Sureflap for some years and it has been great, takes 4 AA batteries which last roughly a year, it also has a manual 4 way lock, as per TheChair's comment you simply programme it by putting it into 'learning mode' by pressing a button and while the light is flashing hold the cat so that its head is in the opening and job is done!