Donate SIGN UP

DIY

901 to 920 of 1665

First Previous 43 44 45 46 47 48 49 Next Last

Avatar Image
kat1
Put my heating on today & the radiator in the main bedroom is only luke warm even when turned up to 5. Tried bleeding it but just getting brown smelly water out? All the other radiators are...
Avatar Image
jbuttress23
repair polished table top from watermarks
Avatar Image
jackthehat
I have just hung a new door to my bedroom. I've 'handed' the door, chased out for the hinges, etc. and it all fits a treat. However, just before the door closes, it makes quite a loud 'creak'......and...
Avatar Image
Red-berry
What is the maximum amp arc welder that can be used on a 6kva generator
Avatar Image
Ratty2E
I'm putting down some vinyl tiles/planks in my Mums hallway. The floor is wooden floorboards so it'll probably want levelling with hardboard first but would you put any insulation down too.
Avatar Image
Bert
The question has been asked before, I know, but the way mine has broken seems a bit different to the other questions. My zip is on a bag and is the sort where the sides that close together look like...
Avatar Image
Al_74
Hi I hope someone can help, I have an ongoing issue with the water in the bathroom. The bath and sink were pumping out luke warm water around 37-38 degrees on their own but the shower was stone cold....
Avatar Image
Ric.ror
I currently have quite poor quality laminate flooring throughout my house. I am considering replacing it and would be grateful for any advice. I dont have any small children living at the house and no...
Avatar Image
wullybaxter
put a post on home & garden, but mabye have a better chance here. where can I buy 50mm & 38mm broad elastic in the lothians...
Avatar Image
joannie10
nice sunny day and I feel the place is looking a bit grubby - what would you advise for cleaning down the paint work ie gloss paint on wooden doors and emulsion on walls, I just don't feel soapy water...
Avatar Image
humbersloop
I have an area of steel running through our barge that needs insulating which can't be foam sprayed and the material needs to be affixed directly - it can't be screwed. The insulation also can't be...
Avatar Image
curtis21
The mains stopcock is situated in a small cupboard. The tap is 3" from the wall and 5" up from the floor. My problem is that I am disabled and unable to bend down. Also the tap is too stiff...
Avatar Image
porkchop
My shower mixer unit has a chrome nob in the middle which diverts flow to shower or tap when pulled up or down. This nob has become stuck and very hard to operate. Any suggestions of how I can fix...
Avatar Image
fieryforest
Any advice on reviving elderley & dull looking cane furniture would be welcomed.
Avatar Image
Barquentine
Would anyone know how I could go about using an existing sliding door-RAIL (above the kitchen lintel) to fix a spare hinged door (which has no hinges on it and is presently just leaning against the...
Avatar Image
Stargazer
What is the best lubricant to use on a stopcock? Mine are regularly far too stiff to turn easily even though I do a half turn back after I have fully opened them. Some time back when I mentioned that...
Avatar Image
Neenee
Hi I need to cover pillar box red paint. I have an attic conversion with some sections of the walls being pillar box red colour. These part of the walls have about 4 coats of paint on them as they...
Avatar Image
rsvp
I want to fit a door curtain to an inward opening door. Any tips would be gratefully appreciated. Thank you.
Avatar Image
lmg0209
Hi, Can anyone tell me if I would be able to install this mixer tap onto my bath which is already installed with 2 normal taps on it without having to uninstall my entire bath unit?...
Avatar Image
invisiblelady
How successful is this? I'm really not up to removing the tiles floor to ceiling in my bathroom. I'm not actually sure if I'm up to tiling the damn room! However, if the tiles that are on the wall are...

901 to 920 of 1665

First Previous 43 44 45 46 47 48 49 Next Last