Donate SIGN UP

DIY

1221 to 1240 of 1665

First Previous 59 60 61 62 63 64 65 Next Last

Avatar Image
davidk65
Does anyone know what the regulations are concerning the use use of a "staging board" (work platform) used to bridge a pit? The staging board is standard construction industry equipment and...
Avatar Image
sara3
DIY.. oh dear! couldn't find a better category than this :o/ my dad's gravestone is white marble, and almost 40 years old. I don't get to visit very often as it's not near home, but my sister is over...
Avatar Image
tezestwing
can you tile on top of existing tile what adhesive would be needed for a kitchen
Avatar Image
Zubar
Hi, The water coming out of our hot tap is warm, whereas it used to be extemely hot!! I have turned off the boiler and then reset it as per instructions, but it still isn't heating up the water...
Avatar Image
wolf63
I have a pine bed that has slats that are no longer stuck to the frame. I intended to just get new screws but there are no local DIY shops and Woolworthss has closed down. All DIY shops are out of...
Avatar Image
Lonnie
I've just put a wooden swing seat with frame in my garden, I bought some clear Yacht Varnish but my neighbour says not to varnish, as it seals, and the wood can't breathe, but to use something like...
Avatar Image
moggie 939
Hello My Hotpoint nearly new Fridge Freezer is noisy. Did not notice it too much when had a separate kitchen, but in our new apartment with kitchen diner it is annoying to say the least! Have tried...
Avatar Image
Groupie
I am about to lay concrete slabs 900x600x50 (heavy b*gg*rs)and I have whacked the sub base and now want to know how thick a whacked layer of sharp sand i should put knowing the slabs are heavy? PS...
Avatar Image
barb1314
In my kitchen I have limestone tiling and wooden worktops.Where the tops meet the tiles there is a thin line of grout which,in some places,is breaking away. I am wanting to refill the gap and wondered...
Avatar Image
woodchopper
For painting external render on house - which paint to use ? Sandtex masonry paint or Dulux Weathershield?...
Avatar Image
Finwoodhill
Have just fitted an untreated Oak front door set, so don't want to leave it too long before treating. Undecided what is the best thing to use on it. I don't want It to be stained, just protected by...
Avatar Image
QuizmasterG
Whenever we turn off the hot water tap in either the bathroom or kitchen we get a hammering noise unless we turn off the taps slowly. I thought it might be an airlock (as suggested by several people)...
Avatar Image
dorcan1
The tin foil is pasted flat against the wall and was used to reflect heat from a radiator back into the room.(radiator has now been removed)
Avatar Image
scotman
My bath taps need maintenance. I estimate the age of these taps as about 30 years. The problem is that the internal screw which moves the plunger vertically is badly worn and the tap sometimes jams....
Avatar Image
sad old git
Hi.I posted a question about paste the wall papers last month and got good results.We have since bought six rolls of this paper to do our breakfast room (I'm rambling on a bit). My worry/question is...
Avatar Image
foxyferret
I have obtained some good quality wall cupboards from a neighbour who was changing the colour of their kitchen. These are for my daughter as she does not have enough. I am not sure how these will fit...
Avatar Image
xstitcher
Can a bathtub be painted and if yes....how.
Avatar Image
moonraker558
Does anyone know the best to go for Inset door handles preferably chrome? I have trawled the web pages on google but can't seem to find what I am looking for.
Avatar Image
arabicarabic20
what is the best way for Foundation is by Foundation blocks or by max Concrete
Avatar Image
Louise07
My husband has boxed some plumbing in bathroom with 'Green' MDF (Moisture resistant MDF). We are planning to emulsion it but what to I prepare it with first? something like the Polycell 3 in 1 base...

1221 to 1240 of 1665

First Previous 59 60 61 62 63 64 65 Next Last